首页 | 本学科首页   官方微博 | 高级检索  
     检索      

金属橡胶减振器用于发动机安装减振的研究
引用本文:邓吉宏,王轲,陈国平,张方,施荣明,陈忠明.金属橡胶减振器用于发动机安装减振的研究[J].航空学报,2008,29(6):1581-1585.
作者姓名:邓吉宏  王轲  陈国平  张方  施荣明  陈忠明
作者单位:1. 南京航空航天大学振动工程研究所,江苏,南京,210016;沈阳飞机设计研究所,辽宁,沈阳,110035
2. 南京航空航天大学振动工程研究所,江苏,南京,210016
3. 沈阳飞机设计研究所,辽宁,沈阳,110035
摘    要: 为减小发动机传递至飞机机身结构的振动,设计了金属橡胶减振器用于航空发动机安装。对该金属橡胶减振器进行了动力学建模研究,采用有限元技术对安装减振器前后的飞机全机结构进行了仿真分析,初步表明了该设计对结构频率影响较小,但能引入较大阻尼,降低响应水平。在理论分析基础上,进一步将设计制造的金属橡胶减振器安装于某型飞机,进行地面开车,实测了应用减振安装前后飞机的动力学响应。结果证明了发动机减振安装的可行性与有效性。

关 键 词:金属橡胶  减振器  发动机安装  振动  动力学  

Study on Effect of Engine Installation Metal Rubber Damper
Deng Jihong,Wang Ke,Chen Guoping,Zhang Fang,Shi Rongming,Chen Zhongming.Study on Effect of Engine Installation Metal Rubber Damper[J].Acta Aeronautica et Astronautica Sinica,2008,29(6):1581-1585.
Authors:Deng Jihong  Wang Ke  Chen Guoping  Zhang Fang  Shi Rongming  Chen Zhongming
Institution:Deng Jihong1,2,Wang Ke1,Chen Guoping1,Zhang Fang1,Shi Rongming2,Chen Zhongming2 (1.Institute of Vibration Engineering,Nanjing University of Aeronautics , Astronautics,Nanjing 210016,China) (2.Shenyang Aircraft Design , Research Institute,Shenyang 110035,China)
Abstract:In order to reduce the vibration the engine transfers to the fuselage structure,a metal rubber damper is designed and used in the installation of a jet engine. A dynamics model of this metal rubber damper is built and a dynamics simulating analysis of the airplane structure with or without the damper is performed. It is demonstrated that this design introduces considevable damping and greatly reduces vibration response without much effect on structure frequency. After theoretical analysis the metal rubber d...
Keywords:metal rubber  damper  engine installation  vibration  dynamics  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空学报》浏览原始摘要信息
点击此处可从《航空学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号