Al2O3陶瓷蠕动进给超声磨削加工表面质量的试验研究

为探索利用简单形状砂轮对陶瓷材料进行数控展成型面超声磨削,通过对Al2O3陶瓷进行蠕动进给超声磨削和机械磨削对比试验研究,探索各加工参数对磨削表面质量的影响规律.结果表明:超声振动方向与蠕动进给方向平行时可降低表面粗糙度值,而超声振动方向与蠕动进给方向垂直时则不利于改善加工表面质量;在超声磨削条件下,为了提高加工表面质量,应采取较小的磨削深度、较低的进给速度和适当高的磨削速度以及复合进给磨削方式.结合试验结果理论分析了蠕动进给超声磨削和蠕动进给机械磨削加工机理,并根据试验结果选择磨削参数进行了陶瓷叶片型面超声磨削的可行性试验.

Experimental Research on the Ground Surface Quality of Creep Feed Ultrasonic Grinding Ceramics (Al2O3)

In order to grind the ceramic blade surface with the Numerical Control contour evolution ultrasonic grinding method using the simple shape grinding wheel, primary comparative experiments of creep feed grinding with and without ultrasonic vibration were carried out to grind Al2O3 ceramics so as to implore the effects of different process parameters on the machined surface quality. It can be concluded that when the direction of ultrasonic vibration is parallel to the direction of creep feed, the value of the surface roughness will be decreased; otherwise the surface quality will become worse. With the ultrasonic grinding method, the slower feed-rate, the smaller grinding depth, the higher grinding speed and the compound feed grinding method should be applied in order to improve the surface quality. The creep feed grinding meehanisms with and without ultrasonic vibration were analyzed theoretically from the experimental results. With the selected grinding parameters resulted from the experiments, the feasibility experiment of ultrasonic grinding ceramic blade surface was cartied out.