| GTEM传输室特性阻抗的三维有限元分析 |
| |
| 引用本文： | 胡玉生,李保江.GTEM传输室特性阻抗的三维有限元分析[J].航空计测技术,2006,26(2):4-5,12. |
| |
| 作者姓名： | 胡玉生 李保江 |
| |
| 作者单位： | [1]集美大学机械工程学院,福建厦门361021 [2]南京航空航天大学机电学院,江苏南京210016 |
| |
| 基金项目： | 福建省青年科技人才创新基金 |
| |
| 摘 要： | 采用有限元法对GTEM传输室的特性阻抗进行了三维分析.沿球面波的方向截取GTEM传输室的一段作为计算模型,通过分段多角度计算,求出芯板的最佳张角.考虑芯板厚度对阻抗的影响给出了芯板优化方案.在有限元分析软件ANSYS下开发了计算特性阻抗的用户模块,提高了设计效率.由于本文提出的计算方法能更好地逼近场分布的真实情况,因而具有较高的计算精度.
|
| 关 键 词： | GTEM传输室 特性阻抗 有限元法 |
| 文章编号： | 1002-6061（2006）02-0004-02 |
| 收稿时间： | 2005-09-09 |
| 修稿时间： | 2005-09-09 |
Analysis of the Characteristic Impedance of GTEM Cell by Three-dimension Finite-element Method |
| |
| HU Yu-sheng,LI Bao-jiang.Analysis of the Characteristic Impedance of GTEM Cell by Three-dimension Finite-element Method[J].Aviation Metrology & Measurement Technology,2006,26(2):4-5,12. |
| |
| Authors: | HU Yu-sheng LI Bao-jiang |
| |
| Institution: | 1. Institute of mechanical engineering, Jimei University; Xiamen 361021, China; 2. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| |
| Abstract: | The characteristic impedance of GTEM cell is analyzed by three-dimension finite element method.The calculation model is the sect cut from the GTEM cell along the spherical wave direction.The optimized angle of septum is found through calculating the characteristic impedances for different sects and different angles.The optimum plan for correcting the septum is proposed,considering the effect of the thickness of septum.The(user's) program module for calculating the characteristic impedance is developed under the environment of ANSYS,which greatly improves the design efficiency.The method discussed in this paper approximate,perfectly to the real state of electromagnetic field distribution,so it's more accurate. |
| |
| Keywords: | GTEM cell characteristic impedance FEM |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
