| 基于正交试验的超声波喷丸成形工艺参数分析及弧高值预测 |
| |
| 引用本文： | 关艳英,王治业,鲁世红,张春.基于正交试验的超声波喷丸成形工艺参数分析及弧高值预测[J].宇航材料工艺,2018,48(2):7-12. |
| |
| 作者姓名： | 关艳英 王治业 鲁世红 张春 |
| |
| 作者单位： | 中航飞机股份有限公司西安飞机分公司工艺研究所;南京航空航天大学机电学院 |
| |
| 基金项目： | 江苏省科研创新计划（SJLX16-0113） |
| |
| 摘 要： | 针对带筋板的超声波喷丸成形,采用正交试验法研究了撞针速度、撞针直径、成形轨迹间距、喷丸区域宽度对带筋板超声波喷丸成形弧高值的影响,得出最佳参数组合方案,并以此作为样本数据,建立多元回归分析数学模型。通过实验验证模型的准确性,试验数据和回归分析数据相符较好,可以用回归分析的数学模型来预测喷丸弧高值,提高工艺设计效率。
|
| 关 键 词： | 超声波喷丸成形 正交试验 回归分析 带筋板 |
| 收稿时间： | 2017/8/14 0:00:00 |
Analysis of Ultrasonic Peen Forming (UPF) Parameters and Prediction of Formed Arc Height Based on Orthogonal Test |
| |
| GUAN Yanying,WANG Zhiye,LU Shihong and ZHANG Chun.Analysis of Ultrasonic Peen Forming (UPF) Parameters and Prediction of Formed Arc Height Based on Orthogonal Test[J].Aerospace Materials & Technology,2018,48(2):7-12. |
| |
| Authors: | GUAN Yanying WANG Zhiye LU Shihong and ZHANG Chun |
| |
| Institution: | AVIC aircraft, Limited by Share Ltd, Xi''an Aircraft Branch, Institute of Technology, Xi''an 710089,College of Mechanical and Electronic Engineering, Nanjing University of Aeromautics and Astronautics, Nanjing 210016,College of Mechanical and Electronic Engineering, Nanjing University of Aeromautics and Astronautics, Nanjing 210016 and College of Mechanical and Electronic Engineering, Nanjing University of Aeromautics and Astronautics, Nanjing 210016 |
| |
| Abstract: | The paper studied the effects of pin velocity,pin diameter,distance of forming trajectory and the width of peening strip corresponding to UPF on the formed arc height of stiffened plate by the orthogonal test.The optimal combination of UPF technological parameters can be obtained. Based on above-mentioned data as the sample data,the multiple regression analysis mathematical model was established.The accuracy of the mathematical model was proved by the sample.The experimental results agree well with the regression analysis data.The multiple regression analysis mathematical model can efficiently predict formed arc height in order to improve the efficiency of the process design. |
| |
| Keywords: | Ultrasonic shot peening forming Orthogonal test Regression analysis Stiffened plate |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|
