| 热氧、湿热和热水老化对T300/ BHEP 复合材料玻璃化转变温度的影响 |
| |
| 引用本文： | 詹茂盛,李小换,许文,刘宇.热氧、湿热和热水老化对T300/ BHEP 复合材料玻璃化转变温度的影响[J].宇航材料工艺,2011,41(3). |
| |
| 作者姓名： | 詹茂盛 李小换 许文 刘宇 |
| |
| 作者单位： | 1. 北京航空航天大学材料学院,北京,100191
2. 航天材料及工艺研究所,北京,100076 |
| |
| 摘 要： | 通过对碳纤维/环氧复合材料(T300/BHEP)进行热氧、湿热和热水老化研究,得到了材料的质量变化率和Tg随老化条件的演变规律,分析了老化机理.结果表明:T300/BHEP复合材料在热氧老化条件下,因后固化和自由体积收缩,Tg升高;在湿热和热水老化条件下,因水分塑化作用和水对分子链间氢键的破坏,Tg降低.三种老化条件下,Tg与质量变化率均呈线性关系.对比80℃热氧、80℃/RH75%湿热和80℃热水老化条件下的结果,发现水分的塑化作用对Tg的影响要大于因热的作用产生的后固化,且湿度越大,Tg降低越明显.
|
| 关 键 词： | 热氧老化 热水老化 复合材料 玻璃化转变温度 |
Changes of Tg of T300/ BHEP Composite in Thermo Oxidative,Hygrothermal and Hot Water Aging Conditions |
| |
| Zhan Maosheng,Li Xiaohuan,Xu Wen,Liu Yu.Changes of Tg of T300/ BHEP Composite in Thermo Oxidative,Hygrothermal and Hot Water Aging Conditions[J].Aerospace Materials & Technology,2011,41(3). |
| |
| Authors: | Zhan Maosheng Li Xiaohuan Xu Wen Liu Yu |
| |
| Institution: | Zhan Maosheng1 Li Xiaohuan1 Xu Wen2 Liu Yu2(1 Beihang University,Beijing 100191)(2 Aerospace Research Institute of Materials & Processing Technology,Beijing 100076) |
| |
| Abstract: | The aging of carbon fiber/epoxy resin composite(T300/BHEP) in thermo-oxidative,hygrothermal and hot water aging conditions are studied,the changes of weight and glass transition temperature(Tg) with aging conditions are tested and analyzed the aging mechanisms.Results show that the Tg of T300/BHEP composite increases in thermo-oxidative aging conditions because of post curing and free volume shrinkage,and the plasticization of water causes decrease of Tg in hygrothermal and hot water aging conditions.In the... |
| |
| Keywords: | Thermo-oxidative aging Hot water aging Composites Glass transition temperature |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|
