| 不同填料对氢化丁腈橡胶耐烧蚀材料性能的影响 |
| |
| 引用本文： | 张春梅,杜华太,庞明磊,周摇义.不同填料对氢化丁腈橡胶耐烧蚀材料性能的影响[J].宇航材料工艺,2010,40(6). |
| |
| 作者姓名： | 张春梅 杜华太 庞明磊 周摇义 |
| |
| 作者单位： | 山东非金属材料研究所,济南 |
| |
| 摘 要： | 以氢化丁腈橡胶(HNBR)为基体,分别添加有机纤维1、有机纤维2、碳纤维粉和纳米无机物,通过形貌分析和X射线能谱仪(EDS),研究不同用量下不同烧蚀填料对HNBR烧蚀性能及力学性能的影响,发现在该试验条件下,添加有机纤维1和纳米无机物的HNBR能获得较好的烧蚀性能;添加有机纤维1时HNBR材料的力学性能很差,纳米无机物的加入对其力学性能影响不大;添加有机纤维2和碳纤维粉的HNBR力学性能变化不大,但烧蚀性能不理想。
|
| 关 键 词： | 氢化丁腈橡胶 耐烧蚀填料 有机纤维 碳纤维粉 纳米无机物 |
Influence of Different Fillers on Performance of HNBR Ablative Materials |
| |
| Zhang Chunmei,Du Huatai,Pang Minglei,Zhou Yi.Influence of Different Fillers on Performance of HNBR Ablative Materials[J].Aerospace Materials & Technology,2010,40(6). |
| |
| Authors: | Zhang Chunmei Du Huatai Pang Minglei Zhou Yi |
| |
| Institution: | Institute of Shandong Non Metallic Materials,Jinan |
| |
| Abstract: | Organic fiber 1,organic fiber 2,carbon fiber powder and nanoinorganic substance were added to HN
BR matrix respectively. By morphology analysis and Xray energy dispersive spectroscopy (EDS),the effect of different amount of different fillers on ablation performance and mechanical properties of HNBR was studied. It is foundthat HNBR with organic fiber 1 and nano inorganic substance possesses good ablation performance. HNBR with organic fiber 1 has poor mechanical properties,while nano inorganic substance have little impact on mechanical properties ofHNBR. HNBR with organic fiber 2 and carbon fiber powders has little impact on mechanical properties but unsatisfactory ablation performance. |
| |
| Keywords: | HNBR rubber Ablative fillers Organic fiber Carbon fiber powder Nano inorganic substance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|
