首页 | 本学科首页   官方微博 | 高级检索  
     检索      

RFI 用酚醛树脂体系的固化动力学和TTT 图
引用本文:赵慧欣,陈立新,梁滨.RFI 用酚醛树脂体系的固化动力学和TTT 图[J].宇航材料工艺,2011,41(5).
作者姓名:赵慧欣  陈立新  梁滨
作者单位:1. 西北工业大学理学院应用化学系,空间应用物理与化学教育部重点实验室,西安710072
2. 西北工业大学理学院应用化学系,空间应用物理与化学教育部重点实验室,西安710072;北京航空材料研究院,北京100095
摘    要:研制了适合树脂膜熔渗工艺(RFI)的酚醛树脂体系,采用动态DSC技术和固化度的测试,建立了改性树脂体系的固化动力学模型,研究了等温条件下固化度/温度/时间关系以及固化度/玻璃化转变温度关系,通过平板拉丝法研究树脂的凝胶过程,得出凝胶时间和温度之间的关系,回归得到凝胶时的固化度为αgel=53.33%,并以此计算出凝胶时的Tg,gel=48.64℃,在此基础上绘制了该体系的TTT图.

关 键 词:酚醛树脂膜  固化度  固化动力学  玻璃化转变温度  TTT图

Cure Kinetics and TTTDiagram of Phenolic Resin Utilized in Resin Film Infusion
Zhao Huixin,Chen Lixin,Liang Bin.Cure Kinetics and TTTDiagram of Phenolic Resin Utilized in Resin Film Infusion[J].Aerospace Materials & Technology,2011,41(5).
Authors:Zhao Huixin  Chen Lixin  Liang Bin
Institution:Zhao Huixin1 Chen Lixin1 Liang Bin1,2(1 Department of Applied Chemistry,School of Science,Northwestern Polytecnical University,Key Laboratory of Space Applied Physics and Chemistry,Ministry of Education,Xi'an 710072) (2 Beijing Institute of Aeronautical Materials,Beijing 100095)
Abstract:The aim of this work is to prepare an novel phenolic resin(PF)film suitable for RFI process and generate its TTT cure diagram.Dynamic DSC technique was conducted to establish curing kinetic model that was used to describe the relationship of curing degree-time-temperature and of curing degree-glass-transition temperature on isothermal conditions.Establishing the relationship between the glass-transition temperature and curing degree allowed the determination of the vitrification lines of the resol resins.In...
Keywords:Phenolic resin film  Curing degree  Curing kinetic model  Glass-transition temperature  Time-Temperature-Transformation diagram  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《宇航材料工艺》浏览原始摘要信息
点击此处可从《宇航材料工艺》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号