R0110重型燃气轮机燃烧室三维数值模拟 |
| |
引用本文: | 齐兵,金戈,顾铭企.R0110重型燃气轮机燃烧室三维数值模拟[J].航空发动机,2009,35(4):29-32,44. |
| |
作者姓名: | 齐兵 金戈 顾铭企 |
| |
作者单位: | 沈阳发动机设计研究所,沈阳,110015 |
| |
摘 要: | 采用SIMPLE算法,应用带有旋流修正的k-ε双方程湍流模型及有限速率/涡耗散化学反应模型,对R011O重型燃气轮机逆流环管型燃烧室单个火焰筒进行了三维数值模拟计算。将计算出的燃烧室出口温度场的分布、品质及火焰筒壁温与试验结果进行了对比分析。燃烧室进口流量、温度、压力等气动参数均与试验时保持一致,火焰筒各部分空气流量也均按火焰筒空气流量分配试验结果给定。计算和对比分析的结果表明,计算得到的燃烧室出口温度场的分布、品质及火焰筒壁温分布与试验结果比较接近。
|
关 键 词: | 燃烧室 数值模拟 重型燃气轮机 温度场 品质 壁温 |
3D Numerical Simulation of R0110 Heavy Duty Gas Turbine Combustor |
| |
Authors: | QI Bing JIN Ge GU Ming-qi |
| |
Institution: | (Shenyang Aeroengine Research Institute, Shenyang 110015, China) |
| |
Abstract: | 3D numerical simulation of the single liner was performed for the ROllO heavy duty gas turbine reverse-flow cannular combustor using SIMPLE algorithm based on k-ε two-equation turbulent model with turbulent corrected and finite-rate/eddy dissipation chemistry reaction model. The comparative analyses between the calculation and experiment results with the distribution and quality of the combustor exist temperature field and the liner wall temperature were conducted. The aerodynamic parameters of the combustor inlet flow, temperature and pressure etc. were consistent with the test values. The airflow distributions of the liner were determined according to the experimental results. The results of the calculation and comparative analysis show that calculation results of the distribution and quality of the combustor exist temperature field and the distribution of liner wall temperature approach to the experimental results. |
| |
Keywords: | combustor numerical simulation heavy duty gas turbine temperature field quality wall temperature |
本文献已被 维普 万方数据 等数据库收录! |