| 采用锯齿冠状混合器的加力燃烧室燃烧特性数值研究 |
| |
| 引用本文： | 王亚盟,张靖周,单勇,高家春,徐兴平.采用锯齿冠状混合器的加力燃烧室燃烧特性数值研究[J].航空动力学报,2011,26(7):1509-1514. |
| |
| 作者姓名： | 王亚盟 张靖周 单勇 高家春 徐兴平 |
| |
| 作者单位： | 1. 南京航空航天大学能源与动力学院,南京,210016
2. 中国航空工业集团公司沈阳发动机设计研究所,沈阳,110015 |
| |
| 基金项目： | 航空科学基金(2008ZB0607) |
| |
| 摘 要： | 基于计算流体动力学（CFD）技术,采用涡耗散燃烧模型对环形混合器和锯齿冠状混合器的加力燃烧进行三维两相化学反应流的数值模拟.计算结果表明：相对于环形混合器,锯齿冠状混合器能够显著提高外涵气流的温度和内涵的含氧量,在相同的供油方案下,使得燃烧效率提高14.9%.
|
| 关 键 词： | 涡扇发动机 加力燃烧室 锯齿冠状混合器 燃烧 数值模拟 |
| 收稿时间： | 2010/6/21 0:00:00 |
| 修稿时间： | 2010/11/4 0:00:00 |
Numerical study on the combustion characteristics of afterburner with chevron mixer |
| |
| WANG Ya-meng,ZHANG Jing-zhou,SHAN Yong,GAO Jia-chun and XU Xing-ping.Numerical study on the combustion characteristics of afterburner with chevron mixer[J].Journal of Aerospace Power,2011,26(7):1509-1514. |
| |
| Authors: | WANG Ya-meng ZHANG Jing-zhou SHAN Yong GAO Jia-chun and XU Xing-ping |
| |
| Institution: | WANG Ya-meng1,ZHANG Jing-zhou1,SHAN Yong1,GAO Jia-chun2,XU Xing-ping2(1.College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China,2.Shenyang Aeroengine Research Institute,Aviation Industry Corporation of China,Shenyang 110015,China) |
| |
| Abstract: | Based on computational fluid dynamics(CFD),the process of three-dimension and two-phase chemical reaction flow of afterburner with confluent mixer and chevron mixer was simulated with introduction of eddy dissipation(ED) model.The results reveal that the temperature of bypass flow and the oxygen content of core flow are enhanced dramatically by chevron mixer,meanwhile,the combustion efficiency increases by 14.9% compared to confluent mixer under the same fuel supply scheme. |
| |
| Keywords: | turbofan engine afterburner chevron mixer combustion numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
