| 基于接触有限元分析的斜齿轮齿廓修形与实验 |
| |
| 引用本文： | 吴勇军,王建军,韩勤锴,李其汉.基于接触有限元分析的斜齿轮齿廓修形与实验[J].航空动力学报,2011,26(2):409-415. |
| |
| 作者姓名： | 吴勇军 王建军 韩勤锴 李其汉 |
| |
| 作者单位： | 北京航空航天大学,能源与动力工程学院,北京,100191 |
| |
| 摘 要： | 研究了基于接触有限元分析的斜齿轮精确齿廓修形设计,并进行了振动对比验证实验.在AN-SYS环境下建立了精确的斜齿轮副接触有限元分析模型,并通过有限元接触分析,以直接提取的啮合线方向综合弹性变形作为齿廓修形设计的依据,精确确定了斜齿轮副的齿廓修形量及修形设计方案;根据所确定的齿廓修形设计方案,设计并建立了台架对比实验系统...
|
| 关 键 词： | 接触有限元分析 斜齿轮 齿廓修形 减振降噪 弹性变形 |
| 收稿时间： | 2010/1/15 0:00:00 |
| 修稿时间： | 2010/3/11 0:00:00 |
Tooth profile modification of helical gears and experimental study based on finite element contact analysis |
| |
| WU Yong-jun,WANG Jian-jun,HAN Qin-kai and LI Qi-han.Tooth profile modification of helical gears and experimental study based on finite element contact analysis[J].Journal of Aerospace Power,2011,26(2):409-415. |
| |
| Authors: | WU Yong-jun WANG Jian-jun HAN Qin-kai and LI Qi-han |
| |
| Institution: | School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China;School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China;School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China;School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China |
| |
| Abstract: | The precise tooth profile modification (TPM) of helical gears based on finite element contact analysis has been investigated,and the vibration comparative experiment has been carried out for verification.An accurate finite element contact analysis model of helical gears was established directly under ANSYS,while the integrated elastic deformation of the meshed teeth was extracted directly from the finite element contact analysis results,and considered as the main basis of the amount of tooth profile modification;then the precise tooth profile modification was presented.According to the presented design of tooth profile modification,the comparative experiment system was built up,and the vibration comparative experiment was carried out under a variety of speed and load conditions;then the actual effects and characteristics of vibration and noise reduction of the modified gears were discussed.Researches show that,the presented precise tooth profile modification is quite correct and reasonable,and also has a good effect of noise and vibration reduction,with the biggest reduction under each criterion down to 11.28dB and 4.69dB . |
| |
| Keywords: | finite element contact analysis helical gears tooth profile modification noise and vibration reduction elastic deformation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
