首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于模糊在线调整权重因子的三相六开关容错逆变器驱动异步电机FCSMPTC
引用本文:余现飞,缪仲翠,张文宾,王志浩,李东亮.基于模糊在线调整权重因子的三相六开关容错逆变器驱动异步电机FCSMPTC[J].航空动力学报,2019,46(4):27-31, 37.
作者姓名:余现飞  缪仲翠  张文宾  王志浩  李东亮
作者单位:兰州交通大学 自动化与电气工程学院,甘肃 兰州730070,兰州交通大学 自动化与电气工程学院,甘肃 兰州730070;兰州交通大学 光电技术与智能控制教育部重点实验室,甘肃 兰州730070,兰州交通大学 自动化与电气工程学院,甘肃 兰州730070,兰州交通大学 自动化与电气工程学院,甘肃 兰州730070,兰州交通大学 自动化与电气工程学院,甘肃 兰州730070
基金项目:国家自然科学基金项目(61663022)
摘    要:为了进一步提高异步电机的控制性能,减小磁链和电流脉动,针对传统异步电机有限控制集模型预测转矩控制(FCSMPTC)中目标代价函数权重因子的配置问题,提出一种模糊在线调整权重因子的异步电机FCSMPTC方法。通过判断转矩和磁链误差,采用TakagiSugeno模糊控制方法实现对权重因子的动态调整,并给出了模糊论域和相应的模糊规则设计。同时考虑到三相异步电机驱动系统中逆变器开关故障给控制系统带来的影响,采用三相六开关容错控制策略对系统进行容错控制。仿真结果表明:该控制方法能够平滑磁链和电流输出,减小电流谐波。

关 键 词:三相六开关容错控制    模糊控制    权重因子    有限集模型预测转矩控制(FCSMPTC)
收稿时间:2018/12/18 0:00:00

ThreePhase SixSwitch FaultTolerant Inverter Driven Asynchronous MotorFCSMTPC Based on Fuzzy Online Adjusting Weight Factor
YU Xianfei,MIAO Zhongcui,ZHANG Wenbin,WANG Zhihao and LI Dongliang.ThreePhase SixSwitch FaultTolerant Inverter Driven Asynchronous MotorFCSMTPC Based on Fuzzy Online Adjusting Weight Factor[J].Journal of Aerospace Power,2019,46(4):27-31, 37.
Authors:YU Xianfei  MIAO Zhongcui  ZHANG Wenbin  WANG Zhihao and LI Dongliang
Institution:School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China,School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China;Key Laboratory of OptoTechnology and Intelligent Control, Ministry of Education,Lanzhou Jiaotong University, Lanzhou 730070, China,School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China,School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China and School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
Abstract:In order to further improve the control performance of asynchronous motor and reduce flux and current ripple, a method of fuzzy online adjusting of weight factor was proposed for the allocation of objective cost function weight factor in traditional finite control set model predictive torque control (FCSMPTC). The TakagiSugeno model fuzzy control method was used to realize the dynamic adjustment of the weighting factor by judging the torque and flux linkage error, and the domain of fuzzy control and its reasoning rule were also built. At the same time, considering the influence of the inverter switch fault on the control system in the threephase asynchronous motor drive system, a threephase sixswitch tolerant control strategy was used as the tolerant control strategy. The simulation results showed that the control method could smooth the flux linkage and current output and reduce the current harmonics.
Keywords:threephase sixswitch faulttolerant control  fuzzy control  weight factor  finite control set model predictive torque control (FCSMPTC)
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号