首页 | 本学科首页   官方微博 | 高级检索  
     检索      

纳米流体在圆管型丝网热管换热强化中的应用
引用本文:舒涛,刘振华.纳米流体在圆管型丝网热管换热强化中的应用[J].航空动力学报,2008,23(10):1795-1799.
作者姓名:舒涛  刘振华
作者单位:上海交通大学 机械与动力工程学院, 上海 200240
摘    要:对纳米流体强化水平放置的丝网热管换热特性进行了实验研究.实验工质为水基CuO纳米流体,颗粒平均粒径50 nm,质量分数为0.5%~2.0%.实验在定压下进行,压力为7.45~19.97 kPa.结果显示,纳米流体替代去离子水后,热管换热性能大幅度提高.蒸发段换热系数提高了170%~410%.运行压力对热管换热特性有明显影响.压力越小,热管换热的强化越显著.热管换热特性随纳米流体质量分数的增加而提高,到达一定值后开始随之下降,最佳质量分数在1.0%左右. 

关 键 词:纳米流体    热管    强化传热    丝网
收稿时间:9/28/2007 4:51:31 PM
修稿时间:2007/12/27 0:00:00

Application of nanofluid in thermal performance enhancement of horizontal screen heat pipe
SHU Tao and LIU Zhen-hua.Application of nanofluid in thermal performance enhancement of horizontal screen heat pipe[J].Journal of Aerospace Power,2008,23(10):1795-1799.
Authors:SHU Tao and LIU Zhen-hua
Institution:School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China
Abstract:The heat transfer characteristic of horizontal screen heat pipe using nanofluid was studied experimentally.The nanofluid consists of water and CuO nanoparticles having a mean diameter of 50 nm,the mass concentration of nanofluid ranges from 0.5% to 2.0%,and the operational pressures of the heat pipe varies from 7.45 kPa to 19.97 kPa.The experimental results show that the effect of the particle concentration on both evaporating and condensing heat transfer coefficients and the maximum heat flux is very signi...
Keywords:nanofluid  heat pipe  heat transfer enhancement  screen  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号