| 等离子热障涂层失效机理的数值分析研究 |
| |
| 引用本文： | 胡浩炬,张建宇,杨晓光,李志永,费斌军.等离子热障涂层失效机理的数值分析研究[J].航空动力学报,2010,25(5):1085-1091. |
| |
| 作者姓名： | 胡浩炬 张建宇 杨晓光 李志永 费斌军 |
| |
| 作者单位： | 1. 北京航空航天大学,航空科学与工程学院,北京100191
2. 北京航空航天大学,能源与动力工程学院,北京100191 |
| |
| 摘 要： | 针对带等离子喷涂热障陶瓷涂层的圆筒金属基体结构在典型热循环载荷作用条件下的力学响应进行了数值计算,基于陶瓷层中的应力结果对陶瓷层剥落失效机理展开了分析.计算时对陶瓷层材料分别按理想线弹性本构和黏塑性本构模型开展了模拟.分析发现,陶瓷层的界面(横向)开裂存在两种模式:在降温过程中,陶瓷层容易出现界面波峰处的Ⅰ型开裂与腰部位置处的Ⅱ型开裂;在升温过程中,陶瓷层容易发生垂直开裂使结构中出现陶瓷层/基体的界面端,界面端部严重的应力集中效应使陶瓷层容易在该处横向开裂形成界面处的边裂纹.
|
| 关 键 词： | 热障涂层 黏塑性 应力分析 界面 有限元法 |
| 收稿时间： | 2009/9/27 0:00:00 |
| 修稿时间： | 2009/12/21 0:00:00 |
Numerical study of failure mechanisms on plasma sprayed thermal barrier coatings |
| |
| HU Hao-ju,ZHANG Jian-yu,YANG Xiao-guang,LI Zhi-yong and FEI Bin-jun.Numerical study of failure mechanisms on plasma sprayed thermal barrier coatings[J].Journal of Aerospace Power,2010,25(5):1085-1091. |
| |
| Authors: | HU Hao-ju ZHANG Jian-yu YANG Xiao-guang LI Zhi-yong and FEI Bin-jun |
| |
| Institution: | School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics |
| |
| Abstract: | A numerical simulation of a cylindrical system with plasma sprayed thermal barrier coatings under typical thermal loading was conducted,and the failure mechanisms were analyzed based on the stresses in ceramic coat.It is found that,there are two types of interfacial(transverse)cracking patterns of the ceramic coat:in the cooling process,mode Ⅰ is vulnerable to crack at the peak position of the cosine curve,and modeⅡ at the middle position;in the heating process,interface edges are introduced into the ceramic coat/substrate system as a result of the vertical cracks emergence,and the ceramic coat will transversely crack at these positions because of the stress concentration effect. |
| |
| Keywords: | thermal barrier coatings viscoplasticity stress analysis interfaces finite element method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
