首页 | 本学科首页   官方微博 | 高级检索  
     检索      

金属橡胶冲击隔振系统试验
引用本文:闫辉,姜洪源,刘文剑,郝德刚.金属橡胶冲击隔振系统试验[J].航空动力学报,2009,24(7):1518-1522.
作者姓名:闫辉  姜洪源  刘文剑  郝德刚
作者单位:1. 哈尔滨工业大学机电学院,哈尔滨,150001
2. 哈尔滨工业大学航天学院,哈尔滨,150001
基金项目:国家自然科学基金(50705016);;国家博士后科学基金(20080430926);;国家博士后基金(200801297)
摘    要:金属橡胶抗冲击隔振器利用干摩擦和弹性变形消耗冲击能量,实现缓冲减振的目的.针对某飞行器抗冲击隔振的需求,设计了金属橡胶抗冲击隔振器,并进行了冲击试验,结果表明最大加速度响应和冲击隔离系数随着冲击时间增加而加大,同时冲击隔离系数受冲击载荷的大小影响.在冲击载荷较小时冲击隔离系数随冲击载荷增加而减小,超过一定范围后,冲击隔离系数随着冲击载荷的增加而加大.

关 键 词:metal  rubber(MR)  anti-shock  isolator  isolation  coefficient  
收稿时间:2008/6/16 0:00:00
修稿时间:1/5/2009 12:00:00 AM

Experimental research on metal rubber shock isolation system
YAN Hui,JIANG Hong-yuan,LIU Wen-Jian and HAO De-gang.Experimental research on metal rubber shock isolation system[J].Journal of Aerospace Power,2009,24(7):1518-1522.
Authors:YAN Hui  JIANG Hong-yuan  LIU Wen-Jian and HAO De-gang
Institution:1.School of Mechatronic Engineering;Harbin Institute of Technology;Harbin 150001;China;2.School of Astronautics;China
Abstract:The damping performance of metal rubber(MR) anti-shock isolator depends on the dry friction and elastic deformation that dissipates vibrating energy.An MR isolator was investigated to satisfy the need of shock isolation system of some aircrafts by the shock experiments.The results show that the maximal accelerator response and the shock isolation coefficient increase with the shock duration,while the shock isolation coefficient is affected by shock load.It is concluded that under smaller shock load,the shoc...
Keywords:metal rubber (MR)  anti-shock  isolator  isolation coefficient
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号