首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一种两侧布局的无隔道亚声速进气道流场特性
引用本文:夏杨,李博,王海朋.一种两侧布局的无隔道亚声速进气道流场特性[J].航空动力学报,2013,28(2):348-355.
作者姓名:夏杨  李博  王海朋
作者单位:1. 中国人民解放军总参谋部第六十研究所,南京,210016
2. 南京航空航天大学能源与动力学院,南京,210016
摘    要:对一种两侧翼下布局的无人机无隔道亚声速进气道进行了气动设计和数值模拟研究,给出了该进气道的鼓包结构设计思想,得到了设计飞行马赫数下该进气道的工作特性.计算结果表明:在0°~8°范围内,攻角和侧滑角对进气道性能影响不大,在所有计算状态下,该进气道的总压恢复系数大于0.965,畸变指标小于0.253,满足发动机的工作要求.研究发现:无隔道亚声速进气道的鼓包表面存在相对于机身较高的压力分布,鼓包排除附面层的效果与机身形状、唇口、进口位置以及飞行姿态等有关,对两侧布局方案,鼓包头部不宜太尖,曲面机身有利于附面层的排移.

关 键 词:亚声速进气道  无隔道进气道  鼓包进气道  无人机  附面层  数值模拟
收稿时间:3/4/2012 12:00:00 AM

Flow field characteristics of side-mounted subsonic inlet of the UAV
XIA Yang,LI Bo and WANG Hai-peng.Flow field characteristics of side-mounted subsonic inlet of the UAV[J].Journal of Aerospace Power,2013,28(2):348-355.
Authors:XIA Yang  LI Bo and WANG Hai-peng
Institution:The 60th Research Institute of the General Staff Department of the Chinese People's Liberation Army, Nanjing 210016, China;College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;The 60th Research Institute of the General Staff Department of the Chinese People's Liberation Army, Nanjing 210016, China
Abstract:
Keywords:subsonic inlet  diverterless inlet  bump inlet  UAV(unmanned aerial vehicle)  boundary layer  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号