首页 | 本学科首页   官方微博 | 高级检索  
     检索      

航空直齿轮喷油润滑油气两相流分析
引用本文:王延忠,牛文韬,唐文,郭梅,郭霞,李国权,沈蓉.航空直齿轮喷油润滑油气两相流分析[J].航空动力学报,2013,28(2):439-444.
作者姓名:王延忠  牛文韬  唐文  郭梅  郭霞  李国权  沈蓉
作者单位:1. 北京航空航天大学机械工程及自动化学院,北京,100191
2. 中国航空工业集团公司沈阳发动机设计研究所,沈阳,110015
3. 中国北方车辆研究所车辆传动重点实验室,北京,100072
基金项目:国家自然科学基金(51275020);航空科学基金(20100451008,20110451004);国家高技术研究发展计划(SS2012AA040104)
摘    要:针对航空直齿轮喷油润滑的啮齿瞬时流体状态进行研究,首先对航空直齿轮在喷油润滑工况下一个轮齿的啮合过程与润滑状态作了分析,然后建立了适合齿轮喷油润滑油气两相流分析的瞬态数学计算模型,最后通过计算流体动力学软件对其进行了建模与仿真计算.计算得到了齿轮啮合过程中啮合迹上每一个啮合点的油气率与入口压力数值及其在啮合过程中的变化规律.计算结果为进行齿轮弹性流体动力润滑和混合润滑的计算与分析提供了准确的流体状态参数以及压力入口边界条件.

关 键 词:直齿轮  喷油润滑  油气两相流  计算流体动力学  油气率  入口压力
收稿时间:2012/1/13 0:00:00

Research on oil-air multiphase flow of spray lubrication of aero spur gears
WANG Yan-zhong,NIU Wen-tao,TANG Wen,GUO Mei,GUO Xi,LI Guo-quan and SHEN Rong.Research on oil-air multiphase flow of spray lubrication of aero spur gears[J].Journal of Aerospace Power,2013,28(2):439-444.
Authors:WANG Yan-zhong  NIU Wen-tao  TANG Wen  GUO Mei  GUO Xi  LI Guo-quan and SHEN Rong
Institution:School of Mechanism Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;School of Mechanism Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;School of Mechanism Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;Shenyang Engine Design and Research Institute, Aviation Industry Corporation of China, Shenyang 110015, China;Shenyang Engine Design and Research Institute, Aviation Industry Corporation of China, Shenyang 110015, China;Shenyang Engine Design and Research Institute, Aviation Industry Corporation of China, Shenyang 110015, China;National Key Laboratory of Vehicle Transmission, China North Vehicle Research Institute, Beijing 100072, China
Abstract:Aiming at the transient flow state of the spray lubrication process to aero spur gears,the mesh process and lubrication state of aero spur gears with spray lubrication were firstly analyzed,and the math model of oil-air multiphase flow which was suitable for the spray lubrication of gears was established.Then the numerical model of the multiphase flow was established and the results were obtained,which included the oil-air ratio and the entrance pressure at every mesh point and their changes with the mesh process.The precies flow parameters and pressure boundary conditions to the elastohydrodynamic lubrication and mixed lubrication analysis of the aero spur gears are shown.
Keywords:spur gear  spray lubrication  oil-air multiphase flow  computational fluid dynamics  oil-air ratio  entrance pressure
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号