| 加力燃烧室用齿冠状混合器的数值研究与验证 |
| |
| 引用本文： | 狄虎威,单勇,高家春,张靖周,刘涛.加力燃烧室用齿冠状混合器的数值研究与验证[J].航空动力学报,2012,27(8):1718-1725. |
| |
| 作者姓名： | 狄虎威 单勇 高家春 张靖周 刘涛 |
| |
| 作者单位： | 1. 南京航空航天大学能源与动力学院,南京,210016
2. 中国航空工业集团公司沈阳发动机设计研究所,沈阳,110015 |
| |
| 基金项目： | 航空科学基金(2008ZB0607) |
| |
| 摘 要： | 基于CFD(computational fluid dynamics)技术,分别采用有限速率/涡耗散(finite-rate/eddy-dissipation)、涡耗散(eddy-dissipation)和涡耗散概念(EDC)燃烧模型,对一种曲面齿冠状混合器作用下的加力燃烧室进行数值计算.计算结果表明:曲面齿冠状混合器下游产生明显的流向涡对,流向涡的存在可以增强内外涵冷热气流掺混;与直面齿冠状混合器相比,曲面齿冠状混合器下游流向涡强度大于直面齿冠状混合器,其混合效率高于直面齿冠状混合器;加力燃烧室内氧气和二氧化碳质量分数分布结构表明了涡耗散模型的计算更为合理;计算结果可为加力燃烧室混合器选型和燃烧数值模拟提供依据.
|
| 关 键 词： | 涡扇发动机 加力燃烧室 曲面齿冠状混合器 燃烧模型 数值模拟 |
| 收稿时间： | 2011/9/16 0:00:00 |
Numerical study and verification on combustion characteristics of afterburner with chevron mixer |
| |
| DI Hu-wei,SHAN Yong,GAO Jia-chun,ZHANG Jing-zhou and LIU Tao.Numerical study and verification on combustion characteristics of afterburner with chevron mixer[J].Journal of Aerospace Power,2012,27(8):1718-1725. |
| |
| Authors: | DI Hu-wei SHAN Yong GAO Jia-chun ZHANG Jing-zhou and LIU Tao |
| |
| Institution: | College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Shenyang Aeroengine Research Institute, Aviation Industry Corporation of China,Shenyang 110015,China;College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Shenyang Aeroengine Research Institute, Aviation Industry Corporation of China,Shenyang 110015,China |
| |
| Abstract: | Based on computational fluid dynamics(CFD),the two-phase turbulent combustion in a three-dimensional afterburner with a kind of curved chevron mixer was simulated.Eddy-dissipation,finite-rate/eddy-dissipation and eddy-dissipation-conception models were applied to the combustion simulation,respectively.Numerical results indicate that abundant streamwise vortices,which enhance the mixture between the core flow and bypass flow,form and develop along the downstream of the curved chevron mixer.The intensity of streamwise vortices deduced by curved chevron mixer always is greater than that of the straight chevron mixer.Therefore,the mixing efficiency of curved chevron mixer is the best.The eddy-dissipation model is the most realizable based on the distribution of O2 and CO2. |
| |
| Keywords: | turbofan engine afterburner curved chevron mixer combustion model numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
