| 轴对称喷管与圆转方喷管冷却换热特性的比较 |
| |
| 引用本文： | 韩非,刘宇.轴对称喷管与圆转方喷管冷却换热特性的比较[J].航空动力学报,2007,22(11):1947-1953. |
| |
| 作者姓名： | 韩非 刘宇 |
| |
| 作者单位： | 北京航空航天大学,宇航学院,北京,100083 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 为了解和比较轴对称喷管与圆转方喷管不同的再生冷却换热特性,分别对轴对称喷管(推力室)与圆转方喷管(推力室)建立计算模型,通过数值模拟的方法重点研究和比较了轴对称喷管与圆转方喷管的流场、壁面热流密度和温度分布、冷却剂温升和冷却通道压降等换热特性.计算结果表明:圆转方喷管由于型面不连续,在转方位置后壁面出现了温度和热流密度的峰值,从而导致沿周向壁面温度和热流密度的分布也不均匀.
|
| 关 键 词： | 航空、航天推进系统 塞式喷管 推力室 再生冷却 数值模拟 换热 |
| 文章编号： | 1000-8055(2007)11-1947-07 |
| 收稿时间： | 2006/11/6 0:00:00 |
| 修稿时间： | 2006年11月6日 |
Heat transfer characteristics of axi-symmetrical nozzle and RS nozzle |
| |
| HAN Fei and LIU Yu.Heat transfer characteristics of axi-symmetrical nozzle and RS nozzle[J].Journal of Aerospace Power,2007,22(11):1947-1953. |
| |
| Authors: | HAN Fei and LIU Yu |
| |
| Institution: | School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China;School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China |
| |
| Abstract: | To understand and compare different heat transfer characteristics of regenerative cooling in axi-symmetrical nozzle and round to square nozzle(RS nozzle),computational models of axi-symmetrical nozzle(thrust chamber) and RS nozzle(thrust chamber) were established.Numerical simulation was employed to investigate and compare fluid field,wall temperature,heat flux,coolant heat pick-up and pressure loss in the cooling circuit of axi-symmetrical nozzle and RS nozzle.The results show: In case of RS nozzle,because its contour is not continuous,peak values of wall temperature and heat flux exist at the location next to shape transformation,which leads to non-uniform temperature and heat flux distribution along the wall circumference. |
| |
| Keywords: | aerospace propulsion system plug nozzle thrust chamber regenerative cooling numerical simulation heat transfer |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
