| 0018Ni马氏体时效钢电阻点焊工艺试验研究 |
| |
| 引用本文： | 樊兆宝,安绍孔,王英健,刘爱琴.0018Ni马氏体时效钢电阻点焊工艺试验研究[J].航空精密制造技术,2009,45(3). |
| |
| 作者姓名： | 樊兆宝 安绍孔 王英健 刘爱琴 |
| |
| 作者单位： | 中国空空导弹研究院,河南洛阳,471009 |
| |
| 摘 要： | 研究了不同的工艺制度对0018Ni高强度马氏体沉淀硬化时效钢电阻点焊接头显微组织及力学性能的影响.结果表明采用固溶+焊接+固溶+时效的工艺制度,电阻点焊接头的金相组织和单点剪切力较为理想.
|
| 关 键 词： | 0018Ni马氏体时效钢 电阻点焊 工艺制度 金相组织 单点剪切力 |
Study on Resistance Spot Welding Technology of 0018Ni Austenitic Aged Steel |
| |
| FAN Zhao-bao,AN Shao-kong,WANG Ying-jian,et al..Study on Resistance Spot Welding Technology of 0018Ni Austenitic Aged Steel[J].Aviation Precision Manufacturing Technology,2009,45(3). |
| |
| Authors: | FAN Zhao-bao AN Shao-kong WANG Ying-jian |
| |
| Institution: | China Airborne Missile Academy;Luoyang 471009 |
| |
| Abstract: | Influence about microstructure and mechanical property of aged steel resistance spot weld joint of 0018Ni high strength austenitic deposition rigidification aged steel by different technology system was researched.The result showed that the metallographic phase composition and single point shear cut of resistance spot weld joint by technology system of solid-solution +weld +solid-solution+age were better. |
| |
| Keywords: | 0018Ni austenitic aged steel resistance spot welding technology system metallographic phase composition single point shear cut force |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
