| 民用飞机起落架缓冲器选型与对比分析研究 |
| |
| 引用本文： | 张璞,刘向尧,聂宏,魏小辉.民用飞机起落架缓冲器选型与对比分析研究[J].航空工程进展,2011,2(3):287-291. |
| |
| 作者姓名： | 张璞 刘向尧 聂宏 魏小辉 |
| |
| 作者单位： | 1. 中国商用飞机有限责任公司上海飞机设计研究院,上海,200232
2. 南京航空航天大学飞行器先进设计技术国防重点学科实验室,南京,210016 |
| |
| 基金项目： | 江苏省研究生培养创新工程 |
| |
| 摘 要： | 以民用飞机前起落架和主起落架为研究对象,首先运用Delphi和SQLServer开发了民用飞机缓冲器参数设计程序,计算了前起落架采用单腔定油孔型式和单腔变油孔型式、主起落架采用单腔定油孔型式和双腔定油孔型式的缓冲器的设计参数;然后基于ADAMS/Aircraft模块分别建立了前起落架和主起落架的虚拟样机,并进行落震仿真分析,仿真结果符合要求;最后通过仿真结果进行起落架缓冲器不同型式的对比分析。研究结果表明：单腔变油孔型式较单腔定油孔型式提高了缓冲器的缓冲效率、双腔定油孔型式较单腔定油孔型式在大的下沉速度下降低了缓冲器的过载。
|
| 关 键 词： | 民用飞机 起落架 缓冲器 参数设计 虚拟样机 |
Research on Types and Comparisons of Landing Gears Shock Absorber for Civil Airplane |
| |
| Zhang Pu,Liu Xiangyao,Nie Hong,Wei Xiaohui.Research on Types and Comparisons of Landing Gears Shock Absorber for Civil Airplane[J].Advances in Aeronautical Science and Engineering,2011,2(3):287-291. |
| |
| Authors: | Zhang Pu Liu Xiangyao Nie Hong Wei Xiaohui |
| |
| Institution: | Zhang Pu1,Liu Xiangyao2,Nie Hong2,Wei Xiaohui2(1.Shanghai Aircraft Design and Research Institute,Commercial Aircraft Corporation of China,Ltd.,Shanghai 200235,China)(2.Key Laboratory of Fundamental Science for National Defense-Advanced Design Technology of Flight Vehicles,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) |
| |
| Abstract: | The nose landing gear and main landing gear are chosen as subjects to investigate in this paper.At first,by using Delphi and SQL Server,the parameter design program of the shock absorber is developed.The parameters of single-acting shock absorber,single-acting shock absorber with a metering pin for the nose landing gear and single-acting shock absorber,double-acting shock absorber for the main landing gear are calculated.Then the virtual prototypes of the nose landing gear and main landing gear for dynamic analysis of landing gear impact are established on ADAMS/Aircraft.There is a good correspondence between the simulation results and required results.Finally,the comparison analysis of different shock absorber types is given.As a result,the efficiency is higher using the single-acting shock absorber with a metering pin.The load factor is lower using the double-acting shock absorber in the condition of the high sink speed. |
| |
| Keywords: | civil airplane landing gear shock absorber parameter design virtual prototype |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
