首页 | 本学科首页   官方微博 | 高级检索  
     检索      

SiC/Ti-153复合材料界面与性能研究
引用本文:蔡杉,李占一,董妍,颜鸣皋.SiC/Ti-153复合材料界面与性能研究[J].航空材料学报,2006,26(6):55-59.
作者姓名:蔡杉  李占一  董妍  颜鸣皋
作者单位:北京航空材料研究院,先进复合材料国防科技重点实验室,北京,100095
摘    要:对带(B4C C)涂层的SiC纤维增强Ti-153复合材料的界面反应进行热力学分析,并对界面反应层做能谱成分分析及X-射线衍射结构分析.结果表明,界面反应层为TiC,TiB2和TiB相的组合物.采用不同的热压工艺制备复合材料并分别进行拉伸实验及扫面电镜观察,从而得出不同界面结合状态与拉伸性能之间的关系.对经不同时间的热处理具有不同界面反应层厚度的复合材料进行拉伸实验,结果表明,随着反应层厚度的增加复合材料性能下降.

关 键 词:SiC/Ti复合材料  界面反应  拉伸性能
文章编号:1005-5053(2006)06-0055-05
修稿时间:2005年11月3日

An Investigation on Interface and Tensile Strength of SiC/Ti-153 Composites
CAI Shan,LI Zhan-yi,DONG Yan,YAN Ming-gao.An Investigation on Interface and Tensile Strength of SiC/Ti-153 Composites[J].Journal of Aeronautical Materials,2006,26(6):55-59.
Authors:CAI Shan  LI Zhan-yi  DONG Yan  YAN Ming-gao
Abstract:The interfacial reaction in SiC/(B_4C C)/Ti-153 composite were studied by thermodynamic calculation and reaction products were analysised by EDX and XRD.The results showed that reaction products were TiC,TiB and TiB_2.Tensile strength of composites after different hot pressing process and with different fracture surface was also investigated by tensile test and SEM.The results indicated that tensile strength was affected by the state of interface.Finally,the tensile strength of composite with different thickness of interfacial reaction layer after different heat-treatment process was evaluated,it was found that with increasing of thickness of interfacial reaction layer,the tensile strength of composites declined.
Keywords:SiC/Ti composites  interfacial reaction  tensile strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号