| 反应烧结氮化硅陶瓷模具拉深不锈钢的试验研究 |
| |
| 引用本文： | 梁金生,傅德水.反应烧结氮化硅陶瓷模具拉深不锈钢的试验研究[J].航空材料学报,1998,18(4):40-44. |
| |
| 作者姓名： | 梁金生 傅德水 |
| |
| 作者单位： | 河北工业大学材料研究中心，天津市欣音不锈钢厨房用品厂 |
| |
| 摘 要： | 在ＹＡ－１００型四柱液压拉深机上，进行了用反应烧结氮化硅材料凹模拉深不锈钢（ＳＵＳ３０４）的试验研究。结果证明：与水基润滑剂配合，反应烧结氮化硅陶瓷材料模具拉深ＳＵＳ３０４不锈钢时，拉深件不产生划痕、划伤等表面缺陷，拉深件废品率低于０．１％，模具表面也不产生拉深棱缺陷，是可以替代金属模具拉深不锈钢的新一代模具材料，应用前景广阔。
|
| 关 键 词： | 反应烧结氮化硅 陶瓷模具 水基拉深润滑剂 SUS304不锈钢 拉深 |
STUDY ON DRAWING SUS304 STAINLESS STEEL WITH REACTION BONDED Si 3N 4 CERAMICS DIE |
| |
| Liang Jinsheng,Liang Guangchuan,Zhang Jianjun,Gao Xinghua.STUDY ON DRAWING SUS304 STAINLESS STEEL WITH REACTION BONDED Si 3N 4 CERAMICS DIE[J].Journal of Aeronautical Materials,1998,18(4):40-44. |
| |
| Authors: | Liang Jinsheng Liang Guangchuan Zhang Jianjun Gao Xinghua |
| |
| Institution: | Liang Jinsheng Liang Guangchuan Zhang Jianjun Gao Xinghua (Hebei University of Technology) Fu Deshui (Xinyin Stainless Steel Cookers Factory of Tian Jin) |
| |
| Abstract: | The drawing tests of stainless steel (SUS304) with reaction bonded Si 3N 4 ceramics die lubricated with water base lubricant were carried out using a four columns YA 100 type drawing machine.The reaction bonded Si 3N 4 ceramics die matched with water base drawing lubricator in drawing stainless steel doesn't produce abrasive defects either on the surface of drawn parts or the die.This is a new potential material which can replace metal dies in the future. |
| |
| Keywords: | reaction bonded Si 3N 4 ceramics die SUS304 stainless steel drawing |
| 本文献已被 CNKI 维普 等数据库收录！ |
