首页 | 本学科首页   官方微博 | 高级检索  
     检索      

2219铝合金搅拌摩擦焊接头缺陷补焊
引用本文:周利,韩柯,刘朝磊,黄诚,常志龙,吴会强,冯吉才,孟凡新.2219铝合金搅拌摩擦焊接头缺陷补焊[J].航空材料学报,2016(1):26-32.
作者姓名:周利  韩柯  刘朝磊  黄诚  常志龙  吴会强  冯吉才  孟凡新
作者单位:1. 哈尔滨工业大学 威海 山东省特种焊接技术重点实验室,山东 威海 264209; 哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨 150001; 天津航天长征火箭制造有限公司,天津 300462;2. 哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨,150001;3. 哈尔滨工业大学 威海 山东省特种焊接技术重点实验室,山东 威海,264209;4. 北京宇航系统工程研究所,北京,100076;5. 哈尔滨工业大学 威海 山东省特种焊接技术重点实验室,山东 威海 264209; 哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨 150001;6. 天津航天长征火箭制造有限公司,天津,300462
基金项目:山东省自主创新及成果转化专项,威海市产学研合作创新示范工程计划项目,威海市科技发展计划项目,先进焊接与连接国家重点实验室开放课题研究基金
摘    要:对2219铝合金搅拌摩擦焊接头中出现的未焊透和孔洞缺陷进行一次、二次搅拌摩擦补焊实验。结果表明:在合适的补焊工艺参数下,可有效消除接头原有缺陷,获得成形美观,性能良好的接头;随补焊次数的增加,接头软化区域显著增加;含有上述两种缺陷接头一次补焊后拉伸性能显著提高,二次补焊接头相比于一次补焊接头拉伸性能有所降低;含有缺陷的原始接头拉伸时均于缺陷处起裂导致接头塑性较低,补焊后接头都断裂于后退侧热影响区与热机影响区交界处,呈韧性断裂模式。

关 键 词:2219  铝合金  搅拌摩擦焊  缺陷  补焊

Repair Welding of Defects in 2219 Al Alloy Friction Stir Welded Joints
Abstract:The primary and secondary friction stir repair welding experiments had been untaken for the lack of penetration and cavity of 2219 aluminum alloy joints welded by friction stir welding.The results show that the original defects can be removed with proper weld-ing process parameters and thus we can achieve joints with smooth appearance and good properties.But the area of joint softened zone is increased dramatically by the increase of repair welding times.The tensile properties of primary repaired joints are satisfactory and better than that of secondary repaired for both lack of penetration and cavity defects.In the original joints,fractures all are started in the defects which led to a low ductility.However,after repair,joints fractured show a ductile fracture character at the interface of heat-affected zone and thermal-mechanical affected zone in retreating side.
Keywords:2219 aluminium alloy  friction stir welding  defect  repair welding
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号