| PAN基碳纤维表面液相氧化改性研究 |
| |
| 引用本文： | 袁华,王成国,卢文博,张珊,陈旸,于美杰.PAN基碳纤维表面液相氧化改性研究[J].航空材料学报,2012,32(2):65-68. |
| |
| 作者姓名： | 袁华 王成国 卢文博 张珊 陈旸 于美杰 |
| |
| 作者单位： | 1. 山东大学材料科学与工程学院材料液固结构演变与加工教育部重点实验室,济南250061;山东大学材料科学与工程学院碳纤维工程技术研究中心,济南250061
2. 山东大学材料科学与工程学院碳纤维工程技术研究中心,济南,250061 |
| |
| 基金项目： | 国家973项目，国家自然科学基金，山东省自然科学基金 |
| |
| 摘 要： | 利用拉曼光谱(Raman),红外光谱(IR)和扫描电镜(SEM)对经过KClO3/H2SO4液相改性处理的碳纤维(CF)表面结构进行了研究,并初步讨论了微观结构对碳纤维单丝力学性能的影响.结果表明:纤维表面的沟槽随改性处理时间增加逐渐加深；表面处理的刻蚀作用会使晶粒边界活性增大,石墨微晶变小；改性处理能够增加CF表面活性官能团(羧酸(-C=O)和酚羟基(-OH)),降低碳纤维表面惰性；表面处理后纤维的力学性能均有所下降,液相氧化处理60min和120min后,拉伸强度分别降低约15％和50％.
|
| 关 键 词： | 碳纤维 拉曼光谱 微观结构 表面改性 |
Liquid-Phase Oxidation Modification of PAN-Based Carbon Fiber Surface |
| |
| YUAN Hua
,
WANG Cheng-guo
,
LU Wen-bo
,
ZHANG Shan
,
CHEN Yang
,
YU Mei-jie.Liquid-Phase Oxidation Modification of PAN-Based Carbon Fiber Surface[J].Journal of Aeronautical Materials,2012,32(2):65-68. |
| |
| Authors: | YUAN Hua WANG Cheng-guo LU Wen-bo ZHANG Shan CHEN Yang YU Mei-jie |
| |
| Institution: | 1.Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education),Shandong University,Jinan 250061,China;2.Carbon Fibre Engineering Research Center,Faculty of Materials Science,Shandong University,Jinan 250061,China) |
| |
| Abstract: | The change of the microstructure of carbon fiber with liquid-phase oxidation modification was investigated under different treatment conditions by Raman spectroscopy(Raman),Infrared spectroscopy(IR),and Scanning electron microscope(SEM).The relationship between microstructure and mechanical properties of monofiber was also studied.The results indicate that surface etching increases surface groove.Acid treatment shows an obvious positive effect on the chemical modification of carbon fiber surface,it increases the grain boundary activity and surface acidic functional groups(—C = O and —OH),while the graphite microcrystalline decrease.The mechanical properties of the carbon fiber decline after acid treatment.The tensile strength decreases about 15% and 50% respectively,when the times for the liquid-phase treatment are 60min and 120min. |
| |
| Keywords: | carbon fiber raman spectroscopy microstructure surface properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
