| 热塑弹性体铝合金化学铣切保护涂料的研制 |
| |
| 引用本文： | 王云英,孟江燕,林翠.热塑弹性体铝合金化学铣切保护涂料的研制[J].航空材料学报,2006,26(5):70-72. |
| |
| 作者姓名： | 王云英 孟江燕 林翠 |
| |
| 作者单位： | 1. 西北工业大学,理学院,西安,710072;南昌航空工业学院材料科学与工程学院,南昌,330034
2. 南昌航空工业学院材料科学与工程学院,南昌,330034 |
| |
| 基金项目： | 南昌航空工业学院校科研和教改项目 |
| |
| 摘 要： | 采用热塑性弹性体为基体材料制备不同配方的铝合金化学铣切保护涂料.实验包括涂料中酚醛树脂的合成,涂料的制备.所做涂料的性能考核包括外观、粘度、固体含量、抗张性、断裂伸长率、浸蚀比、致密性、剥离强度等.最后与美国同类产品性能对比.研究表明,自制的铝合金化学铣切保护涂料的涂膜透明均匀、剥离强度大小适中、耐强碱,满足化学铣切工艺要求,也基本上与美国同类产品性能相当.
|
| 关 键 词： | 铝合金 化学铣切 保护涂料 热塑性弹性体 |
| 文章编号： | 1005-5053(2006)05-0070-03 |
| 修稿时间： | 2005年11月23 |
Preparation of Thermoplastic Elastmer Protect Coating for Chemical Milling of Aluminum Alloy |
| |
| WANG Yun-ying,MENG Jiang-yan,LIN Cui.Preparation of Thermoplastic Elastmer Protect Coating for Chemical Milling of Aluminum Alloy[J].Journal of Aeronautical Materials,2006,26(5):70-72. |
| |
| Authors: | WANG Yun-ying MENG Jiang-yan LIN Cui |
| |
| Abstract: | This study adopted thermoplastic elastmer as the base material of protect coating for chemical milling of aluminum alloy.The experiment included synthesis of PF resin;preparation of protective coating with different kinds of formula;analysis of the performances of protective coating: such as appearance,viscosity,solid content,tensility,rupture elongation ratio,etching ratio,compatibility,peel ability and so on.Finally,the performance of the protect coating is compared with that of the similar products of the USA.Experiment proves that characteristics of the self-produced protective coating,such as transparent uniform film,proper peel strength,perfect aldaline resistance,meets the requirements of chemical milling,approaches that of American products basically. |
| |
| Keywords: | thermoplastic elastmer protective coating chemical milling aluminum alloy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
