| 7A60超高强度铝合金流动应力的研究 |
| |
| 引用本文： | 杨洪涛,陆政,顾家琳.7A60超高强度铝合金流动应力的研究[J].航空材料学报,2005,25(2):12-15. |
| |
| 作者姓名： | 杨洪涛 陆政 顾家琳 |
| |
| 作者单位： | 1. 北京航空材料研究院,北京,100095
2. 清华大学,材料科学与工程系,北京,100084 |
| |
| 摘 要： | 采用等温恒应变速率压缩试验对 7A60超高强度铝合金的流动应力进行了研究。试验结果表明,该合金流动应力随着变形温度的升高而下降,随着应变速率的增加而增加。通过对试验数据的数理统计分析,确定了该合金流动应力对应变速率和变形温度敏感,对应变的变化不敏感。应变速率和变形温度是影响该合金流动应力的关键因素,从而也是变形工艺控制的主要因素。
|
| 关 键 词： | 超高强度铝合金 流动应力 热模拟试验 变形温度 应变速率 |
| 文章编号： | 1005-5053(2005)02-0012-04 |
| 修稿时间： | 2004年5月4日 |
Study on the Flow Stress of 7A60 Ultra High Strength Aluminum Alloy |
| |
| YANG Hong-tao,LU Zheng,GU Jia-lin.Study on the Flow Stress of 7A60 Ultra High Strength Aluminum Alloy[J].Journal of Aeronautical Materials,2005,25(2):12-15. |
| |
| Authors: | YANG Hong-tao LU Zheng GU Jia-lin |
| |
| Institution: | YANG Hong-tao~ |
| |
| Abstract: | The flow stress of 7A60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate. The results showed that the flow stress of this alloy reduced with increasing deform temperature and increased with increasing strain rate. Based on experimental data analysis, it was concluded that the dominant factors affecting flowing stress were the strain rate and deforming temperature, and the two parameters were also important for deforming process control. |
| |
| Keywords: | ultra high strength aluminum alloy flow stress hot simulation deform temperature strain rate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
