| 高速电弧喷涂FeNiCrAl涂层制备工艺对涂层性能影响 |
| |
| 引用本文： | 田浩亮,王长亮,汤智慧,魏世丞,徐滨士,阙民红.高速电弧喷涂FeNiCrAl涂层制备工艺对涂层性能影响[J].航空材料学报,2016(6):40-47. |
| |
| 作者姓名： | 田浩亮 王长亮 汤智慧 魏世丞 徐滨士 阙民红 |
| |
| 作者单位： | 1. 北京航空材料研究院 航空材料先进腐蚀与防护航空科技重点实验室,北京,100095;2. 装甲兵工程学院 装备再制造技术国防科技重点实验室,北京,100072;3. 中国人民解放军第五七一0工厂,湖北 当阳,444100 |
| |
| 基金项目： | 国家自然科学基金(51605455) |
| |
| 摘 要： | FeNiCrAl涂层是一种用作轴类零部件的表面耐磨防护材料,为深入研究高速电弧喷涂工艺对FeNiCrAl涂层性能的影响机理,对不同喷涂参数下制备的涂层的组织结构、结合强度、物相组成和显微硬度等性能进行分析表征,探究“喷涂电流-涂层组织结构-结合强度”之间的关系。结果表明：喷涂电流对涂层的组织致密性及结合强度影响较大；喷涂电流200 A、电压34 V、喷涂距离160 mm的工艺参数下制备的FeNiCrAl涂层组织致密,孔隙率约8.76%,结合强度52.3 MPa,涂层硬度约626 HV0.1,约为基体硬度的1.6倍；影响机理与Fe-Al金属间化合物和Cr0.19 Fe0.1 Ni0.11固溶体在涂层内部均匀弥散分布有关。
|
| 关 键 词： | 高速电弧喷涂 工艺参数 组织结构 结合强度 影响机理 |
Effect of High Velocity Arc Spraying Parameters on Properties of FeNiCrAl Coating |
| |
| Abstract: | FeNiCrAl coating is a kind of surface wear resistant material for shaft parts. Microstructure, adhesive strength, phase com-position and microhardness were analyzed in order to study the influence mechanism of spraying parameters on coating properties. The relation among the spraying current, coating microstructure and cohesive strength was studied in detail. The results shown that the spra-ying current is very important to obtain the dense coating (porosity of 8. 76 %) with cohesive strength of 52. 3 MPa and an excellent coating is prepared by spraying current 200 A, spraying voltage 34 V and spraying distance 160 mm. The hardness of coating is 626 HV0. 1 and about 1. 6 times as that of the matrix. The effective mechanism is relevant to the scatter distribution of the Fe-Al intermetallic compound and Cr0. 19 Fe0. 1 Ni0. 11 solution in the coating. |
| |
| Keywords: | high velocity arc spraying spraying parameter microstructure adhesive strength effect mechanism |
| 本文献已被 万方数据 等数据库收录！ |
|
