|
|||||
|
|
| TC2钛合金异型件热成形工艺研究 | |
| 引用本文： | 张涛,李琦,何露,陈静.TC2钛合金异型件热成形工艺研究[J].航空制造技术,2011(16):57-59. |
| 作者姓名： | 张涛 李琦 何露 陈静 |
| 作者单位： | 1. 北京航空制造工程研究所 2. 海军驻闫良地区航空军事代表室 3. 四川成发航空科技股份有限公司 |
| 摘 要： | 针对TC2钛合金异型零件的成形难题,设计了沿型面压边结构和中心顶出结构的2种成形工装,采用在不同温度下热成形的工艺方法.最后得出此种异型零件的适宜成形温度及成形工装结构. |
| 关 键 词： | TC2 异型件 成形工装 成形温度 |
Research on Hot Forming of Abnormity Part of Titanium Alloy TC2 |
|
| Abstract: | On account of the promble of forming the abnormity part, two forming moulds are designed, one is blank-holder structure along the surface, and the other is central push-out structure, then the problem by hot-forming process on different temperature is solved. Finally the suitable temperature and forming moulds structure of the abnormity part are achieved. |
| Keywords: | TC2 Abnormity part Forming mould Hot-forming temperature |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |