| 复合材料机翼油箱盖板的制造和质量控制 |
| |
| 引用本文： | 叶宏军,翟全胜,程旭.复合材料机翼油箱盖板的制造和质量控制[J].航空制造技术,2009(1). |
| |
| 作者姓名： | 叶宏军 翟全胜 程旭 |
| |
| 作者单位： | 1. 北京航空材料研究院
2. 空军某部军事代表室 |
| |
| 摘 要： | 介绍了采用开模膨胀橡胶法制造带加强筋的复合材料机翼整体油箱油箱盖板的一次共固化的工艺方法.针对初期制造的油箱盖板存在的比较严重的质量问题,包括翘曲、筋条尺寸超差、大面积分层及空隙密集等,提出了相应的设计修改、工艺改进和质量控制措施,最终制造出合格的制件.通过了功能试验和飞行考核.
|
| 关 键 词： | 复合材料工艺 共固化 质量控制 |
Manufacture Process and Quality Control of Composites Cover Panel of Wing Fuel Tank |
| |
| Ye Hongjun,Zhai Quansheng,Cheng Xu.Manufacture Process and Quality Control of Composites Cover Panel of Wing Fuel Tank[J].Aeronautical Manufacturing Technology,2009(1). |
| |
| Authors: | Ye Hongjun Zhai Quansheng Cheng Xu |
| |
| Abstract: | One-step co-curing process of manufacturing the composites cover panel with stiffeners for wing fuel tank by applying open expansive silicon rubber die is presented. In view of more serious defects existing in the parts of initial manufacturing stage, including warp, stiffeners size out-of-tolerance, delamination and dense voids, the corresponding design modification, process improvements and quality control measures, are introduced. Perfect parts are obtained eventually, and the function check and flight t... |
| |
| Keywords: | Composites process Co-curing Quality control |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
