| 飞机框肋零件橡皮囊液压成形回弹研究综述 |
| |
| 引用本文： | 闫红勇,刘闯,王俊彪.飞机框肋零件橡皮囊液压成形回弹研究综述[J].航空制造技术,2011(5). |
| |
| 作者姓名： | 闫红勇 刘闯 王俊彪 |
| |
| 作者单位： | 西北工业大学现代设计与集成制造技术教育部重点实验室 |
| |
| 基金项目： | 国家863/CIMS 主题资助项目，国防基础科研资助项目 |
| |
| 摘 要： | 回弹是影响飞机框肋零件成形质量的主要因素之一,通过分析影响框肋零件回弹的主要因素,对框肋零件橡皮囊液压成形工艺的回弹预测及控制研究情况做了综述,并将预测方法归类为解析法、有限元法、人工神经网络法和试验法4种,最后总结分析了框肋零件橡皮囊成形零件回弹控制方法的发展方向.
|
| 关 键 词： | 回弹 框肋零件 橡皮囊液压成形 |
Springback Research Assessment of Rubber Pad Hydraulic Forming for Aircraft Frame and Rib Part |
| |
| Yan Hongyong,Liu Chuang,Wang Junbiao.Springback Research Assessment of Rubber Pad Hydraulic Forming for Aircraft Frame and Rib Part[J].Aeronautical Manufacturing Technology,2011(5). |
| |
| Authors: | Yan Hongyong Liu Chuang Wang Junbiao |
| |
| Abstract: | Springback is one of the main problems which influence the quality of aircraft frame and rib part.By analyzing the main factors of affecting frame and rib parts' springback,the springback predict and control methods are summarized.And the springback predict methods are classified into four categories including theoretical method,finite element method,artificial neural network method and experimental method.Finally,the development direction of springback control method is analyzed. |
| |
| Keywords: | Springback Frame and rib part Rubber pad hydraulic forming |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
