| 基于AMEsim的某型航空发动机轴向柱塞泵特性仿真 |
| |
| 引用本文： | 刘明明,石宏,黄笑飞.基于AMEsim的某型航空发动机轴向柱塞泵特性仿真[J].沈阳航空工业学院学报,2011,28(4):22-26. |
| |
| 作者姓名： | 刘明明 石宏 黄笑飞 |
| |
| 作者单位： | 沈阳航空航天大学动力与能源学院 辽宁沈阳110136 |
| |
| 摘 要： | 分析了柱塞泵的工作原理，建立了柱塞泵柱塞的运动方程。在此基础上，利用AMEsim工程仿真软件建立了单个柱塞的仿真模型。根据某型航空发动机上柱塞泵的结构参数设置了仿真参数，分析了分油盘结构对柱塞的影响；并在不同的斜盘角度下，分析了柱塞腔的压力、轴向油压作用力的变化情况；最后，对在不同泄漏间隙条件下的泄漏量进行了分析。本文仿真分析所得结果可为柱塞泵的优化设计提供相关理论依据。
|
| 关 键 词： | 柱塞泵 流量 压力 AMEsim仿真 |
Characteristics simulation of swash plate axial pump of an aeroengine with AMEsim |
| |
| LIU Ming-ming,SHI Hong,HUANG Xiao-fei.Characteristics simulation of swash plate axial pump of an aeroengine with AMEsim[J].Journal of Shenyang Institute of Aeronautical Engineering,2011,28(4):22-26. |
| |
| Authors: | LIU Ming-ming SHI Hong HUANG Xiao-fei |
| |
| Institution: | LIU Ming-ming SHI Hong HUANG Xiao-fei(School of Aero Dynamics and Energy Engineering,Shenyang Aerospace University,Liaoning,Shenyang 110136) |
| |
| Abstract: | The motion equation of plunger piston was established by analyzing its working principle and the simulation model of single plunger piston was built with AMEsim.By setting the main parameters of the model,the structure characteristics of the sub oil pan were obtained through the simulation analysis,and the pressure of plunger cavity and the hydraulic-force on the plunger were analyzed by setting the different angles of swash plate.Finally,the leakage flow was analyzed according to the different leakage clea... |
| |
| Keywords: | plunger pump flow pressure AMEsim simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
