| 模型燃烧室温度控制系统仿真 |
| |
| 引用本文： | 李超,王成军,张群杰.模型燃烧室温度控制系统仿真[J].沈阳航空工业学院学报,2012,29(2):5-8. |
| |
| 作者姓名： | 李超 王成军 张群杰 |
| |
| 作者单位： | 沈阳航空航天大学航空航天工程学部(院),沈阳,110136 |
| |
| 摘 要： | 以LabVIEW软件为平台，对低污染模型燃烧室出口温度分布实施离线监测，其中不同油气比下模型燃烧室出口温度分布采用数值模拟方法获得，据此建立燃烧室出口平均温度与进口油气比间的数据库；以燃烧室出口平均温度作为控制信号，以PID算法作为调节模型，以查询数据库的方式产生数据源，实现了燃烧室出口温度控制过程的仿真。
|
| 关 键 词： | 双旋流燃烧室 数值模拟 PID控制 LabVIEW |
Simulation study on control system of combustion temperature |
| |
| LI Chao
,
WANG Cheng-jun
,
ZHANG Qun-jie.Simulation study on control system of combustion temperature[J].Journal of Shenyang Institute of Aeronautical Engineering,2012,29(2):5-8. |
| |
| Authors: | LI Chao WANG Cheng-jun ZHANG Qun-jie |
| |
| Institution: | (Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136) |
| |
| Abstract: | The outlet temperature distribution of low pollution combustor model was monitored offiine using LabVIEW. In different fuel-air ratio, the distribution of outlet temperature was calculated by numerical com- putation and the database of average outlet temperature to inlet fuel-air ratio was built based on this result. During the simulation of controlling outlet temperature, the average outlet temperature was used as a control signal and PID algorithm as adjustment model, and the data source was created by querying database. |
| |
| Keywords: | double swirler combustor numerical simulation PID control LabVIEW |
| 本文献已被 维普 万方数据 等数据库收录！ |
