| 数控机床铣螺纹用盘形铣刀的近似造型及误差计算 |
| |
| 引用本文： | 张桂木,赵树国.数控机床铣螺纹用盘形铣刀的近似造型及误差计算[J].沈阳航空工业学院学报,1999,16(3):38-40. |
| |
| 作者姓名： | 张桂木 赵树国 |
| |
| 作者单位： | 沈阳航空工业学院飞行器制造工程系 |
| |
| 摘 要： | 在数控铣床上加工螺纹，需要设计盘形铣刀，本文求导了铣刀宽度计算公式，分析了产生误差的原因，并提出了改进措施。
|
| 关 键 词： | 数控机床 盘形铣刀 螺纹 设计 铣刀宽度 误差 |
Mould-Making and the Calculate of Tolerance for the Dish-Mill Tool in the Numerical-Control Machine Thread is Made |
| |
| Zhang Guimu,Zhao Shuguo,Wang yan.Mould-Making and the Calculate of Tolerance for the Dish-Mill Tool in the Numerical-Control Machine Thread is Made[J].Journal of Shenyang Institute of Aeronautical Engineering,1999,16(3):38-40. |
| |
| Authors: | Zhang Guimu Zhao Shuguo Wang yan |
| |
| Institution: | Zhang Guimu;Zhao Shuguo;Wang yan |
| |
| Abstract: | Tread is machined using numerical - control machine. Mill tool is designed. The calculated formula of the mill tool width is inferred,and the reason of tolerance is analyzed, and the improved measure is put. |
| |
| Keywords: | numerical-control machine Dish-mill tool Thread |
| 本文献已被 CNKI 维普 等数据库收录！ |
