| 工程陶瓷型面的超声磨削装置设计 |
| |
| 引用本文： | 杨卫平,徐家文.工程陶瓷型面的超声磨削装置设计[J].南昌航空工业学院学报,2003,17(4):5-8. |
| |
| 作者姓名： | 杨卫平 徐家文 |
| |
| 作者单位： | 南京航空航天大学，机电学院，南京航空航天大学，机电学院 南京210016，南昌航空工业学院机械系，江西南昌330034，南京210016 |
| |
| 基金项目： | 江西省材料科学与工程研究中心基金项目 (KG2 0 0 2 0 10 40 ) |
| |
| 摘 要： | 以工程陶瓷三维型面的加工为例 ,介绍了超声磨削装置的结构、变幅杆及其系统设计 ,推导了用于数控加工的超声磨削装置变幅杆设计的数学模型。最后 ,在此基础上结合实际范例进行了验证 ,两者结果基本吻合 ,并在相关研究项目的设计中收到了良好的效果。
|
| 关 键 词： | 工程陶瓷 工件型面 超声磨削装置 |
| 文章编号： | 1001-4926(2003)04-0005-04 |
| 修稿时间： | 2003年9月26日 |
Design of Ultrasonic Grinding Device Of Engineering Ceramics Workpiece With Form Surface |
| |
| YANG Wei-ping ?,XU Jia-wen.Design of Ultrasonic Grinding Device Of Engineering Ceramics Workpiece With Form Surface[J].Journal of Nanchang Institute of Aeronautical Technology(Natural Science Edition),2003,17(4):5-8. |
| |
| Authors: | YANG Wei-ping ? XU Jia-wen |
| |
| Institution: | YANG Wei-ping 1?2,XU Jia-wen 1 |
| |
| Abstract: | This paper makes research on the machining of engineering ceramics with form surface, then introduce the design of ultrasonic grinding device of its structure, its amplitude transformer and its combined system in detail, and puts up a mathematical model about the design of amplitude transformer which is applied at numerical control machine tool. In the end, on the base of the work, a virtual example was validated, and the two results agree with each other fairly well. The method has been used in virtual design and has a good purpose. |
| |
| Keywords: | Engineering Ceramics Workpiece With Form Surface Ultrasonic Grinding Device |
| 本文献已被 CNKI 等数据库收录！ |
