首页 | 本学科首页   官方微博 | 高级检索  
     检索      

六维力/加工电流模糊控制电解加工间隙的方法
引用本文:陆永华,赵东标,云乃彰,刘凯.六维力/加工电流模糊控制电解加工间隙的方法[J].南京航空航天大学学报,2009,41(1).
作者姓名:陆永华  赵东标  云乃彰  刘凯
作者单位:南京航空航天大学机电学院,南京,210016
基金项目:国家自然科学基金,航空科学基金,南京航空航天大学科研基金 
摘    要:为了有效控制电解加工间隙,提高加工精度,以六维力和加工电流为模糊控制器输入的原始数据,结合在线检测加工间隙技术,得到测试间隙;设计控制加工间隙的二输入一输出的模糊控制器,把测试间隙与初始设定间隙形成偏差和偏差的变化量,作为模糊控制器的输入,机床主轴进给速度作为模糊控制器输出;在Matlab的Simulink模块中,通过对电解加工系统和模糊控制器组成的联合模型进行仿真试验,并调整加工间隙的初始设定值,得到结论:模糊控制电解加工过程稳定,鲁棒性好,加工过程很快达到平衡状态;在0.2~0.7 mm的加工间隙范围,随着加工间隙的增大,模糊控制器的超调量减小,控制效果好.

关 键 词:电解加工  模糊控制  加工间隙  六维力  加工电流

Fuzzy Controlling Interelectrode Gap Method of Electrochemical Machining(ECM) Based on 6-D Forces and Machining Current
Lu Yonghua,Zhao Dongbiao,Yun Naizhang,Liu Kai.Fuzzy Controlling Interelectrode Gap Method of Electrochemical Machining(ECM) Based on 6-D Forces and Machining Current[J].Journal of Nanjing University of Aeronautics & Astronautics,2009,41(1).
Authors:Lu Yonghua  Zhao Dongbiao  Yun Naizhang  Liu Kai
Institution:College of Mechanical and Electrical Engineering;Nanjing University of Aeronautics & Astronautics;Nanjing;210016;China
Abstract:To effectively control interelectrode gap of electrochemical machining(ECM),the 6-D forces and machining current are used as primary data of fuzzy controller including two inputs and one output.The interelectrode gap from on-line monitoring and the initial setting gap compose deviation and deviation variety,and they are acted as input parameters of the fuzzy controller,and the output of the fuzzy controller is velocity of machine principal axis. A simulation model consisting of the fuzzy controller and ECM ...
Keywords:electrochemical machining  fuzzy control  interelectrode gap  6-D forces  machining current  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号