首页 | 本学科首页   官方微博 | 高级检索  
     检索      

红外灯热流分布试验研究
引用本文:尹晓芳,刘守文,郄殿福.红外灯热流分布试验研究[J].航天器环境工程,2010,27(1):63-66.
作者姓名:尹晓芳  刘守文  郄殿福
作者单位:北京卫星环境工程研究所,北京,100094
基金项目:“十一五”预先研究课题(项目编号:513200902)
摘    要:文章采用蒙特卡罗法建立了红外灯单灯热流分布模型并在真空低温环境下进行了红外灯热流分布测试,以验证模型的准确性.测试在km2空间环境模拟器中进行,采用黑片作为热流传感器.测试过程避免了空气对流对测试的影响,确保了测试数据的准确.对比分析表明,模型计算结果与实测结果偏差在5%以内,满足设计要求,可以作为红外灯阵热流分布模型的建立和红外灯阵热流优化的基础.

关 键 词:红外灯  蒙特卡罗方法  外热流模拟  热流分布测试
收稿时间:2009/5/15 0:00:00

Experimental research of the radiant heat flux produced by an infrared lamp
Yin Xiaofang,Liu Shouwen and Qie Dianfu.Experimental research of the radiant heat flux produced by an infrared lamp[J].Spacecraft Environment Engineering,2010,27(1):63-66.
Authors:Yin Xiaofang  Liu Shouwen and Qie Dianfu
Institution:Beijing Institute of Spacecraft Environment Engineering;Beijing 100094;China
Abstract:Monte Carlo simulation is used for predicting the radiant heat flux distribution produced by an infrared lamp. To obtain the corresponding empirical heat flux distributions for correlating with analysis, experiments were conducted in KM2 with radiometers, at a low temperature of 100 K and a vacuum environment of 1.3×10-3 Pa, to avoid the influence of air convection. The results show that the difference between the experimental and simulated results is less than 5%, and the simulation results can be used as a basis in the infrared lamp array optimization design.
Keywords:infrared lamp  Monte Carlo method  external heat flux simulation  measurement of heat flux distribution  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《航天器环境工程》浏览原始摘要信息
点击此处可从《航天器环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号