| 三元乙丙橡胶粘接工艺研究 |
| |
| 引用本文： | 李辉,邓德凤.三元乙丙橡胶粘接工艺研究[J].航天制造技术,2011(3). |
| |
| 作者姓名： | 李辉 邓德凤 |
| |
| 作者单位： | 第二炮兵驻国营江河化工厂军代室;江北机械工程有限公司; |
| |
| 摘 要： | 通过粘接面处理、粘接压力、胶层厚度、胶层涂刷方式等方面对三元乙丙橡胶粘接性能进行了研究。结果表明,铝合金应喷砂后阳极化、三元乙丙橡胶生胶用乙酸乙脂擦拭、熟胶进行表面打磨;采用三次刷涂,胶层厚度控制在0.1～0.15mm;硫化压力5～10MPa是较好的粘接工艺方法。
|
| 关 键 词： | 三元乙丙橡胶 粘接工艺 粘接性能 |
Study on Bonding Process of EPDM |
| |
| Li Hui Deng Defeng.Study on Bonding Process of EPDM[J].Aerospace Manufacturing Technology,2011(3). |
| |
| Authors: | Li Hui Deng Defeng |
| |
| Institution: | Li Hui1 Deng Defeng2(1.The Second Artillery Military Representative of Jianghe Chemical Plant,Xiaogan 432000,2.Jiangbei Machinery Engineering Co.,Ltd.,Xiaogan 432000) |
| |
| Abstract: | Bonding properties of EPDM are researched through treating methods on bonding surface,bonding pressure,layer thickness and coating method in this article.Results show that anodizing after aluminium alloy sand-blasting,cleaning EPDM raw rubber with ethyl acetate,polishing EPDM cured rubber surface,coating three times,keeping layer thickness between 0.1~0.15mm and being sulfurized at 5~10MPa are better for bonding process of EPDM. |
| |
| Keywords: | EPDM bonding process bonding property |
| 本文献已被 CNKI 等数据库收录！ |
|
