| 等离子体电弧激励器特性及减阻的仿真研究 |
| |
| 作者姓名： | 袁野 赵青 陈伦江 薄勇 |
| |
| 作者单位： | 电子科技大学， 成都 611731,电子科技大学， 成都 611731,电子科技大学， 成都 611731,电子科技大学， 成都 611731 |
| |
| 摘 要： | 设计了一种用于高超声速流动控制的等离子体直流电弧激励器,运用多物理场有限元方法对激励器的工作特性进行了数值模拟,得到了激励器准确热源分布和不同工况下电势、温度等的分布情况。其中,表面电弧激励器在电流7 A、阴阳极距离3.5 mm时在阴极表面最高能得到2.690 5×10~(10) W/m~3的热源值。运用有限体积方法对激励器的斜坡减阻效果进行了数值模拟,得到马赫数为7时总阻力系数最多减小32%的结论。
|
| 关 键 词： | 等离子体减阻 电弧放电 高超声速流动控制 数值模拟 |
Simulation Study on Characteristics of a Plasma Arc Actuator and the Drag Reduction Effect |
| |
| Authors: | YUAN Ye ZHAO Qing CHEN Lunjiang BO Yong |
| |
| Institution: | University of Electronic Science and Technology of China, Chengdu 611731, China,University of Electronic Science and Technology of China, Chengdu 611731, China,University of Electronic Science and Technology of China, Chengdu 611731, China and University of Electronic Science and Technology of China, Chengdu 611731, China |
| |
| Abstract: | A plasma arc actuator was designed, and the working characteristics of the actuator were numerically simulated by using a finite element method of multiphysics. We obtained the accurate heat source distribution, and the distribution of the electric potential, temperature under different working conditions. The maximum heat source value of 2.690 5×1010 W/m3 can be obtained on the cathode surface of the surface arc actuator when the current is 7 A and the distance between anode and cathode is 3.5 mm. The finite volume method was used to numerically simulate the drag reduction effect of the actuator on a wedge, and it was found that the drag coefficient at Mach number 7 decreased by up to 32%. |
| |
| Keywords: | Plasma drag reduction Arc discharge Hypersonic flow control Numerical simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《》浏览原始摘要信息 |
| 点击此处可从《》下载免费的PDF全文 |
|
