| 基于实际切齿方法的螺旋锥齿轮建模与实体设计 |
| |
| 引用本文： | 韩伟娜,许文娟.基于实际切齿方法的螺旋锥齿轮建模与实体设计[J].华北航天工业学院学报,2011(5):10-12. |
| |
| 作者姓名： | 韩伟娜 许文娟 |
| |
| 作者单位： | 北华航天工业学院机械工程系,河北廊坊065000 |
| |
| 基金项目： | 廊坊市科技支撑项目（2010011008） |
| |
| 摘 要： | 基于螺旋锥齿轮副中大轮采用的半滚切法加工原理,提出一种螺旋锥齿轮建模方法,推导出内、外齿顶线方程。应用MATLAB求解齿顶线方程,将结果导入SolidWorks软件生成曲线,基于扫描切除特征得到螺旋齿面,建立了螺旋锥齿轮的三维实体模型。最后通过具体实例说明了实体设计过程。
|
| 关 键 词： | 螺旋锥齿轮 半滚切法 齿顶线 扫描切除 |
Modeling and Solid Design of Spiral Bevel Gears Based on Actual Cutting Method |
| |
| HAN Wei-na,XU Wen-juan.Modeling and Solid Design of Spiral Bevel Gears Based on Actual Cutting Method[J].Journal of North China Institute of Astronautic Engineering,2011(5):10-12. |
| |
| Authors: | HAN Wei-na XU Wen-juan |
| |
| Institution: | (Mechanical Engineering Department,North China Institute of Aerospace Engineering,Langfang 065000,China) |
| |
| Abstract: | According to the principle of generating-forming method for driven gears in spiral bevel gear pairs,this thesis proposes a modeling method of spiral bevel gears and the equations of inside and outside addendum lines are deduced.The equations are solved by MATLAB and the results are transformed into SolidWorks to generate curves.The spiral tooth faces are constructed by the feature of sweep cutting and the three-dimensional solid model of spiral bevel gear is set up.Finally,a specific example is given to introduce the model design process. |
| |
| Keywords: | spiral bevel and hypoid gear generating-forming method addendum lines sweep cutting |
| 本文献已被 维普 等数据库收录！ |
|
