液氧加注过程热力性能分析

为满足某型号运载火箭动力系统试验液氧加注温度要求,需对加注过程进行热力性能分析。通过对常规氧加注过程因漏热和流阻损失引起的温升、液氧泵效率损失引起的温升进行理论计算,得出常规氧加注过程液氧温度变化规律。此外,通过对过冷氧温度掺混特性进行理论计算和数值仿真,得出过冷氧加注的热力性能。上述分析结果与实测数据进行了比对,结果表明,理论分析结果与实测结果吻合性好,液氧加注过程热力特性分析方法正确可行。

Thermal performance analysis of liquid oxygen filling process

In order to meet the requirement of liquid oxygen filling temperature in the test of a launch vehicle power system, the thermal performance in the filling process is analyzed. The temperature rise caused by heat leakage and flow resistance loss in normal liquid oxygen filling process, and the temperature rise caused by efficiency loss of liquid oxygen pump are calculated theoretically to get the temperature variation regularity in normal liquid oxygen filling process. The thermal performance of super cooling liquid oxygen filling process was obtained by theoretical calculation and numerical simulation of super cooling temperature mixing characteristics. The above analysis result and the detected result are contrasted. The results are coincided with experimental data. The results show that the thermal characteristic analysis method for liquid oxygen filling process is correct and feasible.