| 复合材料气瓶有限元分析与爆破压力预测 |
| |
| 引用本文： | 常新龙,张晓军,刘新国,简斌.复合材料气瓶有限元分析与爆破压力预测[J].火箭推进,2008,34(4):27-31. |
| |
| 作者姓名： | 常新龙 张晓军 刘新国 简斌 |
| |
| 作者单位： | 第二炮兵工程学院,陕西西安,710025 |
| |
| 摘 要： | 利用ANSYS大型有限元程序建立了复合材料气瓶的有限元模型，建模中将纤维缠绕层作为复合材料层合板处理，考虑了封头处缠绕层厚度及缠绕角沿子午线不断变化的情况。针对建立的模型进行了气瓶在几个工况点下的变形分析，利用最大应变准则预测了气瓶的爆破压力。通过分析结果与相应试验结果对比，验证了建模与分析方法的正确性。
|
| 关 键 词： | 复合材料气瓶 有限元建模 应力应变分析 |
Finite element analyses and bursting pressure prediction for COPV |
| |
| Chang Xinlong,Zhang Xiaojun,Liu Xinguo,Jian Bin.Finite element analyses and bursting pressure prediction for COPV[J].Journal of Rocket Propulsion,2008,34(4):27-31. |
| |
| Authors: | Chang Xinlong Zhang Xiaojun Liu Xinguo Jian Bin |
| |
| Institution: | (Second Artillery Engineering Institute, Xi＇an 710025, China) |
| |
| Abstract: | A finite element model of composite overwrapped pressure vessels( COPV) is established by ANSYS finite element software. In the modeling process, the number of filament winding layers is treated as composite laminates with thickness and wrap angle variations of every unidirectional layer in the domes section considered. Using this model, static deformation analyses are conducted at several operating modes. Based on the maximum strain criteria, burst pressure of the vessel is predicted. The analyses results ... |
| |
| Keywords: | composite overwrapped pressure vesseles(COPV) finite element modeling stress and strain analyses |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
