| 铜/钢/铜纳米多层复合板制备 |
| |
| 引用本文： | 赵军,陈久川,米新兰.铜/钢/铜纳米多层复合板制备[J].北华航天工业学院学报,2013,23(1):8-9,14. |
| |
| 作者姓名： | 赵军 陈久川 米新兰 |
| |
| 作者单位： | 北华航天工业学院材料工程系,河北廊坊,065000 |
| |
| 基金项目： | 河北省教育厅青年基金(2011252);河北省教育厅基金(Z2010203);河北省科技支撑计划项目(11212143);华南理工大学国家金属材料近净成形工程技术研究中心开放基金(2011010) |
| |
| 摘 要： | 本文将预先进行过表面处理的H62黄铜与Q235钢叠合进行轧制复合,整体压下量71%,制备出0.9mm厚的铜/钢/铜复合板。轧制过程中,铜、铁原子在复合界面处发生了互扩散,互扩散范围约10um。对其进行反复弯曲测试,结果表明复合板轧制复合效果良好。
|
| 关 键 词： | H62黄铜 Q235钢 冷轧 复合板 |
The Production of Nano-Multilayer Brass-Steel-Brass Composite Sheet |
| |
| ZHAO Jun
,
CHEN Jiu-chuan
,
MI Xin-lan.The Production of Nano-Multilayer Brass-Steel-Brass Composite Sheet[J].Journal of North China Institute of Aerospace Engineering,2013,23(1):8-9,14. |
| |
| Authors: | ZHAO Jun CHEN Jiu-chuan MI Xin-lan |
| |
| Institution: | (Material Sciences & Engineering Department,North China Institute of Aerospace Engineer,Langfang 065000,China) |
| |
| Abstract: | Cold rolling composite experiments on H62 brass and Q235 steel were carried out after surface treatment. The result showed that the brass/steel/brass composite sheet with 0.9 mm thickness was produced after overall roll reduction of 71%, the bonding oc-curred in the brass/steel interface during cold roiling, the inter-diffusion processes for Cu atom and Fe atom occurred and diffusion range was 10um. The composite plate was applied in the repeated bending test; the results showed that rolling composite effect was good. |
| |
| Keywords: | H62 brass Q235 steel cold rolling composite sheet |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
