| 带冠整体涡轮盘电火花加工CAD/CAM技术 |
| |
| 引用本文： | 李刚,王振龙,赵万生,吴湘.带冠整体涡轮盘电火花加工CAD/CAM技术[J].南京航空航天大学学报,2007,39(2):253-257. |
| |
| 作者姓名： | 李刚 王振龙 赵万生 吴湘 |
| |
| 作者单位： | 1. 哈尔滨工业大学机电工程学院,哈尔滨,150001
2. 上海交通大学机械与动力工程学院,上海,200030 |
| |
| 摘 要： | 叙述了作者研发的带冠整体涡轮盘电火花加工专用CAD/CAM系统--BliskCad/Cam.该系统解决了电极设计与制造、加工轨迹搜索、加工仿真与精度检测等技术难题.对某航空发动机的带冠整体涡轮盘进行的实验结果表明,BliskCad/Cam完全能够满足加工精度要求,并缩短加工准备时间50%以上.
|
| 关 键 词： | 带冠整体涡轮盘 电火花加工 电极设计 轨迹搜索 |
| 文章编号： | 1005-2615(2007)02-0253-05 |
| 修稿时间： | 2006-03-06 |
CAD/CAM for Shrouded Blisk by Electro-Discharge Machining |
| |
| Li Gang,Wang Zhenlong,Zhao Wansheng,Wu Xiang.CAD/CAM for Shrouded Blisk by Electro-Discharge Machining[J].Journal of Nanjing University of Aeronautics & Astronautics,2007,39(2):253-257. |
| |
| Authors: | Li Gang Wang Zhenlong Zhao Wansheng Wu Xiang |
| |
| Institution: | 1. School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, 150001, China; 2. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200030, China |
| |
| Abstract: | To produce shrouded turbine blisk by electro-discharge machining(EDM),a special CAD/CAM system called the BliskCad/Cam is developed to solve the problems,such as electrode designing and manufacturing,searching path for multi-axis NC-EDM,and precision measurement and detection,etc.BliskCad/Cam can perform parametrical reconstruction of 3-D model of the blisk,intelligent design of complex shape electrode,automatical generation of NC codes for electrode manufacturing,searching of interference-free tool path for multi-axis NC-EDM and machining simulation,etc.An experiment on the shrouded blisk of a certain aeroengine proves that BliskCad/Cam meets the requirements of high precision machining,and also reduces 50% of the accessorial time. |
| |
| Keywords: | BliskCad/Cam |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
