| 聚合物淬火介质用于高碳钢丝淬火冷却的试验研究 |
| |
| 引用本文： | 陈铭,施政,胡孝昀.聚合物淬火介质用于高碳钢丝淬火冷却的试验研究[J].南京航空航天大学学报,2002,34(3):249-251. |
| |
| 作者姓名： | 陈铭 施政 胡孝昀 |
| |
| 作者单位： | 南京航空航天大学材料科学与技术学院,南京,210016 |
| |
| 摘 要： | 采用聚二醇类聚合物淬火介质水溶液代替铅浴用于钢丝的淬火冷却，初步分析了聚合物淬火介质的冷却机理，进一步探索了高碳钢丝无公害处理的新途径，试验结果表明，选用一定浓度范围的聚合物水溶性淬火介质代替铅冷却，可满足钢丝组织和性能的要求。
|
| 关 键 词： | 聚合物 淬火介质 高碳钢丝 淬火冷却 试验研究 |
| 文章编号： | 1005-2615(2002)03-0249-04 |
| 修稿时间： | 2001年7月6日 |
Quenching on High-Carbon Steel Wire Using Polymer Aqueous Solution |
| |
| Chen Ming Shi Zheng Hu Xiaoyun College of Material Science and Technology,Nanjing University of Aeronautics & Astronautics Nanjing ,P.R.China.Quenching on High-Carbon Steel Wire Using Polymer Aqueous Solution[J].Journal of Nanjing University of Aeronautics & Astronautics,2002,34(3):249-251. |
| |
| Authors: | Chen Ming Shi Zheng Hu Xiaoyun College of Material Science and Technology Nanjing University of Aeronautics & Astronautics Nanjing PRChina |
| |
| Institution: | Chen Ming Shi Zheng Hu Xiaoyun College of Material Science and Technology,Nanjing University of Aeronautics & Astronautics Nanjing 210016,P.R.China |
| |
| Abstract: | High-carbon steel wires are quenched by polymer PAG instead of melt lead, and the quenching characteristic of polymer PAG is analyzed. A new method without pollution is developed for treating the high-carbon steel. Experimental results show that the microstructure and mechanical properties of high-carbon steel wires come up to the requirements, when polymer aqueous solution in a certain range is used to replace the melt lead for quenching. |
| |
| Keywords: | steel-wires polymer quenching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
