首页 | 本学科首页   官方微博 | 高级检索  
     检索      

卡箍刚度的有限元计算与实验测定
引用本文:尹泽勇,陈亚农.卡箍刚度的有限元计算与实验测定[J].航空动力学报,1999,14(2):179-182,221.
作者姓名:尹泽勇  陈亚农
作者单位:株洲航空动力机械研究所
摘    要:准确确定卡箍刚度对管路系统的振动特性分析具有重要意义。本文针对航空发动机管路系统中不同卡箍的结构特点,建立了计算卡箍刚度的有限元模型。对单管接地卡箍及双管悬地卡箍的刚度系数进行了有限元计算,还对一典型双管悬地卡箍刚度进行了实验测定。通过卡箍刚度计算结果与实验结果的对比表明,本文建立的卡箍刚度计算方法可用于管路系统振动特性分析工程实际之中。 

关 键 词:卡箍    刚度    有限元分析    测量
收稿时间:6/1/1998 12:00:00 AM
修稿时间:1998/10/1 0:00:00

FINITE ELEMENT ANALYSIS AND EXPERIMENTAL MEASUREMENT OF STIFFNESS OF HOOP
Yin Zeyong and Chen Yanong.FINITE ELEMENT ANALYSIS AND EXPERIMENTAL MEASUREMENT OF STIFFNESS OF HOOP[J].Journal of Aerospace Power,1999,14(2):179-182,221.
Authors:Yin Zeyong and Chen Yanong
Institution:Zhuzhou Aviation Powerplant Research Institute, Zhuzhou 412002
Abstract:It is important to determine the stiffness coefficients of the hoops precisely for the vibration analysis of a pipeline system.For this purpose the finite element models for calculating the stiffness coefficients of the hoops are established in accordance with the structural features of the various hoops used in aeroengine pipeline systems.The stiffness coefficients of a grounded hoop for single pipe and a hung hoop for double pipes are obtained by the finite element analysis.In addition,the stiffness coefficients of a typical hung hoop for double pipes are measured by using the established experimental method.The comparison between the calculational and experimental results of the hoop shows that the provided method is feasible in the engineering practice of vibration analysis for a pipe line system.
Keywords:Hoops stiffness  Finite element analysis  Measurement  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号