| 机器人制孔工艺参数优化有限元仿真分析 |
| |
| 引用本文： | 王继虎,刘长毅,田威,万世明,刘勇,李东明. 机器人制孔工艺参数优化有限元仿真分析[J]. 南京航空航天大学学报, 2012, 44(Z1): 69-72 |
| |
| 作者姓名： | 王继虎 刘长毅 田威 万世明 刘勇 李东明 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,南京,210016
2. 成都飞机工业(集团)有限责任公司,成都,610092 |
| |
| 摘 要： | 采用大型有限元DEFORM-3D和Abaqus软件分析机器人制孔的切削机理和制孔时机器人的振动机理。仿真分析了机器人制孔的切削力,并以仿真数据为基准,拟合了机器人制孔切削力的经验公式,仿真机器人的模态、刚度和阻尼,运用颤振理论分析了机器人制孔时避免振动的工艺参数范围。通过有限元仿真研究表明:有限元仿真计算有效地解决了机器人制孔工艺参数优化问题。
|
| 关 键 词： | 工艺参数优化 有限元法 制孔颤振 机器人 |
Finite Element Analysis of Robot Drilling Parameters Optimization |
| |
| Wang Jihu , Liu Changyi , Tian Wei , Wan Shiming , Liu Yong , Li Dongming. Finite Element Analysis of Robot Drilling Parameters Optimization[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2012, 44(Z1): 69-72 |
| |
| Authors: | Wang Jihu Liu Changyi Tian Wei Wan Shiming Liu Yong Li Dongming |
| |
| Affiliation: | 1.College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics & Astronautics,Nanjing,210016,China;2.Chengdu Aircraft Industrial(Group) Co.Ltd.,Chengdu,610092,China) |
| |
| Abstract: | Simulations of cutting mechanism and drilling vibration of robot drilling are conducted by using FEM analysis software Deform-3D and Abaqus.The simulations of robot drilling forces are conducted and empirical formulas of robot drilling are fitted based on the data obtained from simulations.The simulations of robot mode,stiffness and damping ratio are conducted and proper robot drilling parameters are collected by the theory of chatter.The results indicate that the finite element method can efficiently solve the problem of robot drilling parameter optimization. |
| |
| Keywords: | parameter optimization finite element method drilling vibrations robots |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
