| 基于运动控制卡的多轴机床控制系统 |
| |
| 引用本文： | 涂芬芬,张霖,张志英,赵义顺.基于运动控制卡的多轴机床控制系统[J].南京航空航天大学学报,2012,44(Z1):146-150. |
| |
| 作者姓名： | 涂芬芬 张霖 张志英 赵义顺 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,南京,210016
2. 南京数控机床有限公司技术研发部,南京,211100 |
| |
| 基金项目： | 国家科技支撑计划，江苏省科技攻关计划，2011年高档数控机床与基础制造装备科技计划 |
| |
| 摘 要： | 以自行研制的多轴数控机床为实验平台,开发了基于PC机和运动控制卡的主-从式控制系统。系统开发过程中,引进有限状态机模型构建数控软件系统,采用面向对象的设计手法实现各个模块,在Visual C++平台上完成控制系统设计。最后以简便的人机交互界面形式提供用户操作。
|
| 关 键 词： | 运动控制卡 有限状态机 面向对象 数控系统 |
Control System of Multi-Axes Machine Tools Based on Motion Controller Card |
| |
| Tu Fenfen
,
Zhang Lin
,
Zhang Zhiying
,
Zhao Yishun.Control System of Multi-Axes Machine Tools Based on Motion Controller Card[J].Journal of Nanjing University of Aeronautics & Astronautics,2012,44(Z1):146-150. |
| |
| Authors: | Tu Fenfen Zhang Lin Zhang Zhiying Zhao Yishun |
| |
| Institution: | 1.College of Mechanical and Electrical Engineering,Nanjing University ofAeronautics & Astronautics,Nanjing,210016,China;2.Technology Research and Development Department,Nanjing NC Machine Tool Co.Ltd.,Nanjing,211100,China) |
| |
| Abstract: | Taking the multi-axes numerical control(NC) machine tool as the experimental platform,the development of NC system based on PC and motion controller card is proposed.In the system,the finite state machine is used as the mathematical model and the object-oriented method is used to model.The soft part of the system uses Visual C++.Finally,the system is presented by the man-machine interface to users. |
| |
| Keywords: | motion controller card finite state machine object-oriented numerical control system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
