首页 | 本学科首页   官方微博 | 高级检索  
     检索      

N2O4中铝含量的测定
引用本文:刘艳英,刘再华,俞华斌.N2O4中铝含量的测定[J].上海航天,2006,23(6):58-60.
作者姓名:刘艳英  刘再华  俞华斌
作者单位:西昌卫星发射中心,甘肃,西昌,615000
摘    要:提出了一种用分光光度计测定N2O4中铝含量的方法。先对样品进行预处理以消除N2O4本身颜色对比色的影响。给出了测定步骤。由实验确定的操作条件是:显色剂为玫红三羧酸铵溶液0.5 g/L,最佳用量5 mL,最大吸收波长530 nm。实验表明,该法测得的N2O4中铝含量的相对标准偏差小于5%,回收率大于96%。方法准确可靠。

关 键 词:N2O4  铝含量  分光光度法  预处理  测定条件  相对标准差  回收率
文章编号:1006-1630(2006)06-0058-03
收稿时间:2006-05-16
修稿时间:2006-09-05

Measurement of the Aluminum Content in N2O4
LIU Yan-ying,LIU Zai-hua,YU Hua-bing.Measurement of the Aluminum Content in N2O4[J].Aerospace Shanghai,2006,23(6):58-60.
Authors:LIU Yan-ying  LIU Zai-hua  YU Hua-bing
Institution:Xichang Satellite Launch Center, Xichang Gansu 615000, China
Abstract:A measurement method of aluminum content in N_2O_4 using spectrophotometry was put forward in this paper.The pretreatment of the N_2O_4 sample was adopted to eliminate the influence of N_2O_4's color on the colorimetric.The measurement step was given.The test condition determined by experiment was that colour regent was(0.5) g/L ammonium aurin tricarboxylate solution with optimal 5 mL dosage and maximum absorbing wavelength was 530 nm.The test showed that the relative standard deviation of aluminum content in N_2O_4 measured by this method was smaller than 5%,and recovery rate was bigger than 96%.The method was accurate and reliable.
Keywords:Nitrogen tetroxide  Aluminium content  Spectrophotometry  Pretreatment  Measurement condition  Relative standard deviation  Recovery rate
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号