Resonant inverters for photovoltaic array to utility interface

A number of high-frequency link power converter schemes suitable for interconnecting a photovoltaic (PV) array to the utility line using resonant inverters are presented. Use of high-frequency resonant inverters (HFRI) results in reduced size, weight and cost. Scheme 1 uses the HFRI-cycloconverter, scheme 2 uses the HFRI-rectifier pulsewidth-modulated voltage source inverter, scheme 3 uses the HFRI-rectifier line commutated inverter working with a fixed maximum possible inverting fringe angle, and scheme 4 uses the HFRI-rectifier line-connected inverter (with line current modulation). These schemes are compared. Based on the comparison, scheme 3 was selected for an initial study. To overcome various problems associated with scheme 3, the line current is modulated sinusoidally in scheme 4. In this scheme, the HFRI is controlled appropriately to obtain a rectified sine wave of 120 Hz in the DC link and the function of the line-connected inverter is to unfold this waveform on alternate half cycles to obtain a sinusoidal line current with the line voltage. Methods of commutation of the line connected inverter are explained. Experimental results obtained with scheme 4 are presented