首页 | 本学科首页   官方微博 | 高级检索  
     检索      

喷射沉积SiCp/LY12复合材料的性能及超塑性变形
引用本文:李淼泉.喷射沉积SiCp/LY12复合材料的性能及超塑性变形[J].航空材料学报,1997,17(2):50-55.
作者姓名:李淼泉
作者单位:西北工业大学!西安,710072,西北工业大学,西北工业大学,西北工业大学
基金项目:国家自然科学基金,航空科学基金,陕西省自然科学基金
摘    要:研究了喷射沉积10Vol%SiCp/LY12复合材料的组织、强度极限该复合材料经热等静压和等温热正挤压后的超塑性。结果表明:喷射沉积的铝基复合材料经过简单的预处理具有良好的超塑性性能,应变速率敏感性指数m值达0.53,极限延伸率达345%。这与良好的组织状态密切相关。在该复合材料的超塑性变表过程中,空洞的形核与长大一直存在,空洞的长大和连接对材料的断裂有重要的影响。

关 键 词:喷射沉积  铝基复合材料  超塑性变形

THE PROPERTIES AND SUPERPLASTIC DEFORMATION OF SPRAY-ATOMIZATION AND CO-DEPOSITION SiC_p/LY12 MMCs
Li Miaoquan, Chen Dunjun ,Chen Yanyun ,Tang Cairong.THE PROPERTIES AND SUPERPLASTIC DEFORMATION OF SPRAY-ATOMIZATION AND CO-DEPOSITION SiC_p/LY12 MMCs[J].Journal of Aeronautical Materials,1997,17(2):50-55.
Authors:Li Miaoquan  Chen Dunjun  Chen Yanyun  Tang Cairong
Institution:Northwestern Polytechnical University
Abstract:In the paesent paper, the micrographs and limited strength of 10vol% SiCp/LYl2 spray atomization and co-deposition MMCs are investigated. The superplasticity of this materiaI after HIP and hot extrution is also studied. This spray-atomized material has good superplasticity after pre-treatment and the strain rate sensitivity index m and the limited elongation were found to be 0. 53 and 345%, respectively. The nu-cleation and growing of cavities do exist all the time during the superplasitc deformation and the growing and interlinkage of the cavities have important influence on the fracture of the material.
Keywords:spray atomization  Al-matrix composites  superplastic deformation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号